Skip to main content
Analog Devices DS2430AP+T&R — DC-DC Power Modules
Analog Devices

DS2430AP+T&R 256-bit 1-Wire EEPROM, 15 µs access, Active

MPNDS2430AP+T&R
End of Life

Maxim DS2430AP+T&R, 256-bit serial EEPROM, 1-Wire interface, 32 x 8 organization, 15 µs access time, -40°C to 85°C, 6-TSOC package, Tape & Reel.

$3.19Ref. price · indicative, final on quote
DS2430AP+T&R datasheet
Packaging6-SMD, J-Lead
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

DS2430AP+T&R Technical Specifications
ParameterValue
Memory typeNon-Volatile
Mounting typeSurface Mount
Memory interface1-Wire®
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
TechnologyEEPROM
Access time15 µs
Memory size256bit
Memory formatEEPROM
Case6-SMD, J-Lead
Memory organization32 x 8

Product details

256-bit 1-Wire EEPROM for identification and calibration data

The Maxim DS2430AP+T&R is a 256-bit serial EEPROM communicating over a single-contact 1-Wire bus, organized as 32 x 8 bits. It stores non-volatile configuration, serialization, or calibration constants in a small 6-TSOC surface-mount package. The 1-Wire interface means only one GPIO and one pull-up resistor are needed on the host side, which simplifies PCB routing in space-constrained designs like sensor modules, battery packs, or accessory identification. Access time is 15 µs, which sets the read-cycle timing for the host firmware — the 1-Wire protocol handles the transaction at the bit level, so the 15 µs figure governs the time slot width for reading each bit. The part operates over -40°C to 85°C, covering industrial and outdoor telecom environments.

Memory organization — what 256 bits buys you

32 bytes of EEPROM, organized as 32 x 8 bits, accessed one byte at a time over the 1-Wire bus.

Frequently asked questions

What is the memory size and organization of DS2430AP+T&R?

The DS2430AP+T&R has 256 bits of EEPROM organized as 32 bytes x 8 bits (32 x 8). This is a serial EEPROM accessed one byte at a time over the 1-Wire bus.

What is the difference between DS2430AP+T&R and DS2431?

The DS2431 is a higher-density sibling with 1 Kbit (1024 bits) of EEPROM organized as 128 x 8, compared to the DS2430A's 256 bits (32 x 8). Both use the same 1-Wire interface and 6-TSOC package, so they are footprint-compatible but differ in memory capacity. Choose the DS2431 when you need more than 32 bytes of non-volatile storage.