Siemens 6SL32301YE540AB0 SINAMICS G120X Variable Frequency Drive — 250 kW / 644 A
Overview
The Siemens 6SL32301YE540AB0 is a chassis-mount variable frequency drive in the SINAMICS G120X series, rated for 250 kW AC motor control at 380–480 V nominal input. The MPN prefix 6SL designates the Siemens industrial drives line; 32 denotes motor drives; 3 further places this unit in the SINAMICS family. Output current is specified at 644 A, and the enclosure class is IP20. Operating temperature range is 20°C to 45°C. RoHS status is marked ROHS3 Compliant; product status is Active.
Concrete Selection Trade-offs
-
Suffix variants — AB0, AP0, AF0, CB0, CF0, CP0, 541AB0, 541AF0, 541AP0 — share identical core electrical ratings (250 kW, 644 A, 380–480 V) and mounting form factor. Suffix differentiation within the G120X catalog typically reflects firmware version, country-specific type examination certificates, or packaging configuration. Buyers confirming exact order codes should reference the intended certification region or firmware release required by the installation.
-
Operating temperature window of 20°C–45°C — the G120X platform covers a wide power range; at 250 kW chassis-mounted dissipation demands cabinet-level thermal management (filtered ventilation or climate control). Verify enclosure design accounts for heat load at full load current.
-
Chassis-mount form factor (FSG frame) — no integrated IP rating; the drive must be mounted inside a cabinet or protected enclosure meeting the application's environmental and personnel-safety requirements. Alternate G120X frame sizes in the same power class offer different mounting footprints and current density.
-
644 A output current per unit — the specified output is a single-unit rating. System-level requirements such as paralleled drives, motor feeder length, or cable derating factors are installation-dependent and fall outside the scope of catalog parameter review.
-
FSG frame — 250 kW at 380–480 V — the FSG designation is the frame-size code for this power class in the SINAMICS G120X ordering structure. Different suffixes do not imply different frames; the frame size is fixed by the 250 kW / 644 A rating.
Parameter Summary
| Parameter | Value |
|---|---|
| Series | SINAMICS |
| Motor Type | AC Motor |
| Output Current | 644 A |
| Input Voltage Range | 380–480 V |
| Power Rating | 250 kW |
| Mounting | Chassis Mount |
| Enclosure / IP Rating | Box, IP20 |
| Operating Temperature | 20°C ~ 45°C |
| For Use With | G120X Series |
| RoHS | ROHS3 Compliant |
| Product Status | Active |
In-Catalog Peer Comparison
The table below compares 6SL32301YE540AB0 against three higher-similarity alternates. All share identical output current (644 A), motor type (AC), mounting type (Chassis), and series (SINAMICS). Differences are limited to suffix variant coding.
| MPN | Power | Output Current | Voltage | Frame | Temp Range | Status |
|---|---|---|---|---|---|---|
| 6SL32301YE540AB0 | 250 kW | 644 A | 380–480 V | FSG | 20°C ~ 45°C | Active |
| 6SL32301YE540AP0 | 250 kW | 644 A | 380–480 V | FSG | 20°C ~ 45°C | Active |
| 6SL32301YE540AF0 | 250 kW | 644 A | 380–480 V | FSG | 20°C ~ 45°C | Active |
| 6SL32301YE540CB0 | 250 kW | 644 A | 380–480 V | FSG | 20°C ~ 45°C | Active |
Why they are similar
- 6SL32301YE540AP0: Identical electrical and mechanical specifications; the AP0 suffix places this unit in the same firmware/certification subgroup within the 6SL32301YE540x family.
- 6SL32301YE540AF0: Matches on all listed spec keys (current, voltage, power, mounting, series, motor type). The AF0 suffix encodes a different regional variant or firmware release than AB0.
- 6SL32301YE540CB0: Shares all electrical parameters with the primary unit; the CB0 suffix designates an alternate certification/firmware configuration at the same power class.
Selection among these variants requires the user's own qualification against the target installation's certification region and firmware requirements.
Additional In-Catalog Variants
Further identical-spec alternates are listed in the catalog: 6SL32301YE540CF0, 6SL32301YE540CP0, 6SL32301YE541AB0, 6SL32301YE541AF0, and 6SL32301YE541AP0. All carry the same 644 A output, 250 kW rating, and SINAMICS G120X series designation; suffix variation reflects catalog-level coding differences.
FAQ
What motor types are supported by 6SL32301YE540AB0? The drive is designated for AC Motor control within the SINAMICS G120X platform.
What is the output current rating? Output current is specified at 644 A under the recorded operating conditions.
Does the suffix variant AB0 affect electrical performance? Core electrical parameters — output current (644 A), power (250 kW), voltage range (380–480 V), mounting type, and series — are identical across the 6SL32301YE540x and 6SL32301YE541x families. Suffix differentiation reflects catalog-level coding for firmware, certification region, or packaging configuration.