Skip to main content
Siemens

SCALANCE XB008 (6GK50080BA101AB2)

The SCALANCE XB008 is a Siemens unmanaged industrial Ethernet switch positioned in the "Networking Solutions / Switches, Hubs" category. It provides eight copper ports operating at 10/100 Mbps with fixed configuration and RJ45 connectors. The datasheet must confirm power consumption, switching throughput, MAC table ...

SCALANCE XB008 (6GK50080BA101AB2)

Overview

The SCALANCE XB008 is a Siemens unmanaged industrial Ethernet switch positioned in the "Networking Solutions / Switches, Hubs" category. It provides eight copper ports operating at 10/100 Mbps with fixed configuration and RJ45 connectors. The datasheet must confirm power consumption, switching throughput, MAC table size, and any management or QoS features prior to final selection; these fields are not present in the supplied catalog data.

Key Parameters

ParameterValue
MPN6GK50080BA101AB2
BrandSiemens
ConfigurationFixed
Copper Ports8
Copper Type10/100
Connector TypeRJ45
Number of Ports8
Mounting TypeDIN Rail, Wall Mount
Ingress ProtectionIP20
Operating Temperature10°C ~ 60°C
EncapsulationBulk
PackageBulk
Product StatusActive

Missing / not verified in supplied fields: Power input rating (voltage/current/wattage), power consumption, switching capacity (Gbps or Mpps), MAC address table depth, VLAN or management features, EMC compliance class, weight, dimensions.

Integration / Installation Notes

The device supports DIN rail and wall mounting. IP20 rating limits use to environments free from direct water spray or heavy particulate. Operating range 10°C to 60°C addresses typical cabinet interior but must be evaluated against actual enclosure thermal conditions and any adjacent heat sources.

⚠️ Verification required: Before proceeding, confirm power input requirements, switching fabric capacity, and environmental limits on the official Siemens datasheet for 6GK50080BA101AB2.

Ordering Code / Family Context (verify on datasheet)

Siemens SCALANCE XB-series part numbers encode product type, port count, and speed tier. The prefix 6GK50080BA on 6GK50080BA101AB2 indicates an unmanaged 8-port 10/100BASE-TX switch in the XB008 line; the suffix codes regional variant and certification level. The similar XB005 line shares the same naming scheme at 5 ports, while the XB008G variant upgrades to 10/100/1000BASE-T on all copper ports. Do not assume mechanical dimensions, cooling method, or EMC class from the catalog entry alone.

Similar Catalog Parts

The table below compares the primary part against up to three alternates using shared spec keys only.

Parameter6GK50080BA101AB26GK50080GA101AB26GK50050GA101AB26GK50050BA001AB2
Copper Ports8855
Copper Type10/10010/100/100010/100
ConfigurationFixedFixedFixedFixed
Mounting TypeDIN Rail, Wall MountDIN Rail, Wall MountDIN Rail, Wall MountDIN Rail, Wall Mount
Connector TypeRJ45RJ45RJ45RJ45
Ingress ProtectionIP20IP20IP20IP20
Operating Temp10°C ~ 60°C10°C ~ 60°C10°C ~ 60°C10°C ~ 60°C
Number of Ports8855
PackageBulkBoxBoxBulk
Similarity0.920.840.84

Why Each Is Similar

  • 6GK50080GA101AB2 (SCALANCE XB008G): Same 8-port fixed layout and mounting; shared IP20 and operating temperature; differs by Gigabit copper support (full spec not present in JSON). Similarity 0.92 reflects shared MPN root and identical port count.
  • 6GK50050GA101AB2 (SCALANCE XB005G): Shares brand, configuration, RJ45 connector, IP20, DIN rail mounting, and operating range; scaled down to 5 copper ports at Gigabit speed tier. Useful when fewer ports suffice.
  • 6GK50050BA001AB2 (SCALANCE XB005): Matches 10/100 copper type, Bulk package, IP20, and operating temperature of the primary; 5 ports, fixed configuration, same mounting. Closer to the primary in speed tier than the G variants.

Substitution must be validated with Siemens datasheets for the selected alternate.

FAQ

What network speeds does 6GK50080BA101AB2 support? The catalog entry lists Copper Type as 10/100; this indicates each port supports 10 Mbps and 100 Mbps auto-negotiation. Gigabit copper support is not listed for this specific MPN.

Can 6GK50080BA101AB2 be mounted on a DIN rail inside a sealed enclosure? Mounting type includes DIN Rail and Wall Mount. IP20 ingress protection means the enclosure must provide adequate protection from solids and moisture; thermal modeling of the enclosure is required given the 10°C to 60°C operating range.

Is the alternate 6GK50080GA101AB2 (XB008G) a drop-in replacement for 6GK50080BA101AB2? Both share 8 copper ports and the same mounting and IP20 rating. The XB008G adds Gigabit copper capability per its title; confirm port speed requirements and any PoE power budget differences before substituting, as these details were not in the supplied fields.

Last updated: May 9, 2026