SIMATIC IPC647D Rack PC — 6AG41122KP554XX6
MPN decode: 6AG41122KP554XX6
The 6AG4112 segment places this unit in the Siemens SIMATIC IPC647D family — a 4U rack-mountable industrial computer series intended for control-cabinet or 19-inch rack enclosure deployment. The 2KP554XX suffix encodes the processor class (Xeon E3-1268L v3), installed memory tier, and storage configuration; exact decode follows Siemens standard ordering code conventions for this product line. The chassis ships as an enclosed box with no integral display, supporting PCIe expansion cards.
Engineering verification checklist
- Rack enclosure clearance accommodates the 4U form factor and provides adequate vertical space for PCIe card depth
- Primary power requirement matches the available branch supply in the target panel or rack PDU
- Installed DDR3 SODIMM module count and 32 GB total capacity meet application memory footprint for the runtime load
- Selected operating system version (Windows 7 or Windows 10) is compatible with installed drivers and runtime software stack
- PCIe expansion card selection is verified for mechanical fit and correct lane configuration within the chassis slots
- Multi-agency certifications (CE, CSA, cULus, UL, EAC, KC, RCM) satisfy import and installation requirements for the target geographic market
- Ambient operating temperature at the installation location stays within the 0°C to 50°C rated range under worst-case cabinet thermal conditions
- IP20/IP41 front-panel rating is appropriate for the enclosure environment — additional enclosure IP may be required for overall cabinet rating
Key parameters
| Parameter | Value |
|---|---|
| Core Processor | Intel Xeon E3-1268L v3, 3.3 GHz, 4 Core |
| Memory Installed | DDR3 SODIMM, 32 GB |
| Operating System | Supports Windows 7/10 |
| Operating Temperature | 0°C to 50°C |
| Mounting Type | Rack Mount (4U) |
| Display Type | No Display (headless) |
| Expansion Type | PCIe |
| Ingress Protection | IP20 front / IP41 top |
| Encapsulation | Box |
| Approvals | CE, CSA, cULus, EAC, KC, RCM, UL |
Similar catalog parts
The following IPC647D variants share the same mechanical form factor and the majority of stated specifications. All require the reader's own qualification against the target application.
| MPN | Core Processor | Memory | Similarity |
|---|---|---|---|
| 6AG41122KP554XX6 (primary) | Intel Xeon E3-1268L v3 3.3GHz, 4 Core | DDR3 SODIMM 32GB | — |
| 6AG41122KP511CC6 | Intel Xeon E3-1268L v3 3.3GHz, 4 Core | DDR3 SODIMM 32GB | 0.90 |
| 6AG41122KP524HC3 | Intel Xeon E3-1268L v3 3.3GHz, 4 Core | DDR3 SODIMM 32GB | 0.90 |
| 6AG41122KP750GA6 | Intel Xeon E3-1268L v3 3.3GHz, 4 Core | DDR3 SODIMM 32GB | 0.90 |
Why these are similar: All four share the same Xeon E3-1268L v3 processor class, identical 32 GB DDR3 SODIMM memory, and the same PCIe expansion, IP20/IP41 encapsulation, and CE/CSA/UL multi-agency approval set. They differ only in storage configuration codes embedded in the MPN suffix.
Other in-catalog variants use Intel Core i5/i3-class processors (lower core count) but retain the same chassis, memory tier, IP rating, and expansion architecture.
FAQ
Does the 6AG41122KP554XX6 support hot-swap storage? The catalog record does not specify hot-swap storage capability. Storage type and drive bay configuration are encoded in the MPN suffix and should be verified against Siemens ordering documentation for this variant.
What expansion cards are compatible with the PCIe slots on the 6AG41122KP554XX6? The chassis provides PCIe expansion; specific card types (e.g., fieldbus, I/O, GPU, acquisition) and mechanical envelope limits are not listed in this catalog record.
What power consumption figure applies to the 6AG41122KP554XX6? Power draw is not present in the catalog record for this MPN. Branch circuit sizing should follow the full Siemens IPC647D datasheet for the target configuration.