3RA23288XB301AK6 vs 3RT10652AR36

Comparison matrix

Industrial parameter delta view (differing rows only). Toggle highlight to stress changed cells for cabinet retrofit reviews.

Highlight differences

Normalized specification differences for 3RA23288XB301AK6 and 3RT10652AR36
Parameter	3RA23288XB301AK6	3RT10652AR36
Coil Voltage	120VAC	440 to 480VAC/DC
Must Operate Voltage	96 VAC	-
Switching Voltage	690VAC - Max	1000VAC - Max
Base Product Number	3RA23288XB	3RT1065
Coil Power	77VA	650 W
Contact Rating (current)	38 A	265 A
Operate Time	-	95 ms
Release Time	-	80 ms

Table lists differing catalog rows only; highlight calls attention to the delta cells.

Catalog selection insight

One-line delta from headline spec rows — screening language only, not a suitability or substitution decision.

3RA23288XB301AK6: supply / I/O voltage headline differs from 3RT10652AR36 (120VAC vs 440 to 480VAC/DC) — re-check fuse sizing, surge rating, and SELV/PELV boundaries. 3RA23288XB301AK6: headline supply differs from 3RT10652AR36 — treat as a different electrical platform until PSU, protection, and I/O are revalidated (not a same-rail swap by catalog text alone).

Technical screening notes (catalog snapshot)

Deterministic text from normalized spec keys — not live field-application-engineering advice or manufacturer sign-off.

Technical screening note for 3RA23288XB301AK6 vs 3RT10652AR36: this catalog snapshot lacks obvious isolation/EMC/protocol rows — expand the PDP specification table or open the PDF for creepage, surge, and bus timing before any design change.

Catalog screening tiers (heuristic)

Three non-authoritative screening tiers (mechanical token, functional checklist, planning notes) mirror the JSON-Ld ItemList on this page — not manufacturer substitution letters or field approvals.

Mechanical / packaging row (not interchange)
No substantive shared package token — treat as independent mechanical designs, not a hot swap, until your own checks pass.
Functional screening checklist
Run isolation, supply range, bus timing, and software/runtime checks against your deployed baseline. Matching tokens here do **not** prove interchange — only your qualification tests do.
Design-change planning notes
If you intend a product change, favor wider temperature, higher isolation withstand, or newer fieldbus only **after** manufacturer guidance, software licensing, and enclosure clearance are confirmed — not from this matrix alone.

Tool-style compare: isolation, supply, IP, rail, fieldbus, and EMC rows are surfaced first when present. Open each PDP for PDF revisions and RFQ.

Compatibility screening (catalog text)

Same deterministic tiers as the compare module above — for engineering checklists only, not approved alternates. Supply, protocol, and processor headline mismatches surface as warnings when present.

1. Mechanical / packaging row (not interchange)
No substantive shared package token — treat as independent mechanical designs, not a hot swap, until your own checks pass.
2. Functional screening checklist
Run isolation, supply range, bus timing, and software/runtime checks against your deployed baseline. Matching tokens here do **not** prove interchange — only your qualification tests do.
3. Design-change planning notes
If you intend a product change, favor wider temperature, higher isolation withstand, or newer fieldbus only **after** manufacturer guidance, software licensing, and enclosure clearance are confirmed — not from this matrix alone.

Technical compliance & certifications

Values below are extracted from normalized catalog specification keys and brand-level certification lists (where present). They mirror manufacturer datasheet legends when those strings were captured in the catalog row — not a certificate download. This page was machine-aligned on 2026-05-13 for technical selection support only; it is not the sole basis for installation or safety sign-off in your jurisdiction.