{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"W132-10BXT","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"W132-10BXT","canonicalUrl":"https://icboms.com/infineon/W132-10BXT","factsUrl":"https://icboms.com/api/mcp/products/W132-10BXT","rawCanonicalId":null},"summary":{"shortDescription":"W132-10BXT, Spread Aware™ series, Zero Delay Buffer with PLL, 140 MHz max, 2:11 input:output, LVCMOS/LVTTL outputs, 2.97V–3.63V supply, 0°C to 70°C, 24-TSSOP surface mount.","salesMarkdown":"## What this clock buffer does on the board The W132-10BXT is a PLL-based zero delay buffer from the Spread Aware™ series, designed to regenerate a clock input with deterministic phase alignment and fan it out to multiple loads. It accepts a single-ended clock input and produces up to eleven LVCMOS or LVTTL outputs at frequencies up to 140 MHz, with a 2:11 input-to-output ratio. The zero-delay architecture means the output edges align to the input within the PLL's capture range, making it suitable for synchronising multiple ICs on a single PCB without adding skew. ## 140 MHz ceiling and what it means for your clock tree The maximum frequency is 140 MHz. The PLL locks to the input frequency; divider/multiplier is No/No, so output frequency equals input. ## 2:11 fanout — eleven clock lines from two reference inputs The 2:11 ratio means two clock input pins feed eleven output pins. In practice you drive one input and leave the other as a redundant or alternate reference, or use the second input for a different clock domain if the PLL can switch between them. The eleven outputs give you enough fanout for a moderate-sized board with multiple FPGAs, ASICs, or memory banks without adding a second buffer. The outputs are non-differential — single-ended LVCMOS or LVTTL only — so long PCB traces above a few inches need impedance matching and possibly series termination to maintain signal integrity at 140 MHz. ## Supply rail and temperature — fit for the environment The supply range is 2.97 V to 3.63 V. The operating temperature range is 0°C to 70°C. ## Package and mounting — 24-TSSOP surface mount The 24-TSSOP package has a 0.173-inch body width and 4.40 mm footprint. The supplier device package is 24-TSSOP. ## Lifecycle and sourcing — active, no end-of-life watch The W132-10BXT carries an Active product status. No NRND or last-time-buy flags appear on the lifecycle record. For a BOM line that needs a zero-delay clock buffer, this part does not carry the supply-chain risk of an end-of-life part. ## Provenance check — what to look for on the markings The 24-TSSOP package uses laser-etched date codes and lot numbers. Verify the top-mark font matches the manufacturer's standard for the Spread Aware series.","metaTitle":"W132-10BXT Zero Delay Buffer, PLL, 140 MHz, 24-TSSOP","metaDescription":"W132-10BXT zero delay buffer with PLL, 140 MHz max, 2:11 fanout, LVCMOS/LVTTL outputs, 2.97V-3.63V supply, 0°C to 70°C, 24-TSSOP. Active lifecycle.","metaKeywords":null},"attributes":{"series":"Spread Aware™","packageCase":null,"mountingType":null,"rohsStatus":"Not applicable","productStatus":"Active","categoryPath":["Clock & Timing ICs"],"specifications":{"PLL":"Yes","Type":"Zero Delay Buffer","Input":"Clock","Output":"LVCMOS, LVTTL","Series":"Spread Aware™","Package":"Bulk","Mounting Type":"Surface Mount","Package / Case":"24-TSSOP (0.173\\\", 4.40mm Width)","Frequency - Max":"140MHz","lifecycle_stage":"eol_hot","Voltage - Supply":"2.97V ~ 3.63V","Divider/Multiplier":"No/No","Number of Circuits":"1","Ratio - Input:Output":"2:11","Operating Temperature":"0°C ~ 70°C (TA)","Supplier Device Package":"24-TSSOP","Differential - Input:Output":"No/No"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.0","stockQuantity":0,"priceTiers":[{"qty":301,"price":"$1.00000","currency":"USD"}]},"links":{"datasheetUrl":"https://rocelec.widen.net/view/pdf/ltl4qkagh2/CYPRS03915-1.pdf?t.download=true&u=5oefqw","sourceUrl":null},"ai":{"faq":[{"question":"What is the maximum frequency of W132-10BXT?","answer":"The maximum operating frequency is 140 MHz. Output frequency equals the input frequency because the divider/multiplier is set to No/No."},{"question":"What is W132-10BXT's listed type on this component line?","answer":"The listed type is Zero Delay Buffer, and it includes a PLL. The input is a clock signal, and the outputs are LVCMOS or LVTTL."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/W132-10BXT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/W132-10BXT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}