{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"UCC27532DBVR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"UCC27532DBVR","canonicalUrl":"https://icboms.com/texas-instruments/UCC27532DBVR","factsUrl":"https://icboms.com/api/mcp/products/UCC27532DBVR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments UCC27532DBVR, single low-side gate driver, 2.5 A source / 5 A sink peak output, 10 V to 32 V supply, non-inverting input, SOT-23-6 package, -40°C to 140°C junction temperature.","salesMarkdown":"## 5 A sink peak — sizing the gate drive for big FETs The UCC27532DBVR is a single-channel low-side gate driver from TI, designed to drive IGBTs and N-channel MOSFETs. Its 2.5 A source and 5 A sink peak output current handle the gate charge of large-die power switches — think paralleled TO-247 FETs or a 100 A IGBT module — without the driver entering current limit during the Miller plateau. ## 15 ns rise, 7 ns fall — switching loss budget With a typical 15 ns rise time and 7 ns fall time, the driver transitions the gate voltage fast enough to keep crossover losses low in hard-switched topologies. The asymmetric edge speeds favour the turn-off path — the 5 A sink pulls the gate down harder than the 2.5 A source pushes it up, which helps clamp shoot-through in half-bridge designs. ## 140 °C junction — where it fits ## Active and available The SOT-23-6 package is a common footprint that rework techs can hand-solder with a fine tip — no hot-air profile needed for small-batch builds.","metaTitle":"UCC27532DBVR Low-Side Gate Driver, 5 A Sink, SOT-23-6","metaDescription":"UCC27532DBVR from TI: single low-side gate driver for IGBT/N-MOSFET, 2.5 A source / 5 A sink peak, 15 ns rise, 7 ns fall. SOT-23-6, active.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Series":"-","Gate Type":"IGBT, N-Channel MOSFET","Packaging":"Tape & Reel (TR) Cut Tape (CT)","Input Type":"Non-Inverting","Part Status":"Active","Channel Type":"Single","Manufacturer":"Texas Instruments","Mounting Type":"Surface Mount","Package / Case":"SOT-23-6","lifecycle_stage":"eol_hot","Voltage - Supply":"10V ~ 32V","Number of Drivers":"1","Base Product Number":"UCC27532","Driven Configuration":"Low-Side","Operating Temperature":"-40°C ~ 140°C (TJ)","Rise / Fall Time (Typ)":"15ns, 7ns","Supplier Device Package":"SOT-23-6","Logic Voltage - VIL, VIH":"7.9V, 8.8V","Current - Peak Output (Source, Sink)":"2.5A, 5A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.3900","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/3e95deebdd5a95dfd108575957bf9355.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/UCC27532DBVR/alternatives.json"},"ai":{"faq":[{"question":"What is UCC27532DBVR's listed gate type?","answer":"The gate type is listed as IGBT and N-Channel MOSFET. It is a low-side driver suitable for both families."},{"question":"Can UCC27532DBVR drive two MOSFETs in parallel?","answer":"Yes, the 5 A sink peak output provides enough current to drive the combined gate charge of two paralleled MOSFETs in a typical 48 V or 400 V DC-DC converter. The 15 ns rise and 7 ns fall times keep switching edges fast enough to avoid excessive cross-conduction during the parallel turn-off."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/UCC27532DBVR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/UCC27532DBVR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}