{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"UCC27528D","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"UCC27528D","canonicalUrl":"https://icboms.com/texas-instruments/UCC27528D","factsUrl":"https://icboms.com/api/mcp/products/UCC27528D","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments UCC27528D, dual low-side gate driver, 5A peak source/sink, 7ns rise / 6ns fall, 4.5V to 18V supply, -40°C to 140°C junction, 8-SOIC package, active production.","salesMarkdown":"## Dual 5A low-side driver for IGBT and MOSFET gates It drives N-channel MOSFETs and IGBTs from a 4.5V to 18V supply rail. The 5A peak source/sink capability allows the UCC27528D to charge and discharge the gate capacitance of a large MOSFET or IGBT quickly, reducing the Miller plateau duration and minimising switching losses. For a typical 10 nC total gate charge, the driver can deliver the charge in under 5 ns at the peak current, though the actual edge rate is also limited by the external gate resistor and layout inductance. The 7ns rise and 6ns fall times (typical, 1 nF load) mean the driver can support switching frequencies well into the hundreds of kilohertz without excessive cross-conduction losses, provided the power loop inductance is kept low. The 4.5V to 18V supply range covers the common gate-drive bias voltages for logic-level MOSFETs (5V), standard MOSFETs (10V–12V), and IGBTs (15V). The lower end allows direct operation from a 5V rail without a separate bias converter, simplifying the auxiliary supply design. The -40°C to 140°C junction temperature rating is wider than the typical industrial -40°C to 125°C, providing margin for self-heating in high-frequency or high-load applications. The 140°C TJ(max) also aligns with the requirements of many motor-drive and power-converter designs where the driver sits near the power stage. The independent channel architecture means each output can drive a separate power device, or the two channels can be paralleled for higher peak current into a single gate.","metaTitle":"UCC27528D Low-Side Gate Driver, 5A Peak, 7ns Rise, Active","metaDescription":"Texas Instruments UCC27528D dual low-side gate driver: 5A peak source/sink, 7ns/6ns rise/fall, 4.5V-18V supply, -40°C to 140°C junction.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tube","Gate Type":"IGBT, N-Channel MOSFET","Input Type":"Non-Inverting","Channel Type":"Independent","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"4.5V ~ 18V","Number of Drivers":"2","Base Product Number":"UCC27528","Driven Configuration":"Low-Side","Operating Temperature":"-40°C~140°C(TJ)","Rise / Fall Time (Typ)":"7ns, 6ns","Supplier Device Package":"8-SOIC","Logic Voltage - VIL, VIH":"-","Current - Peak Output (Source, Sink)":"5A, 5A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.6282","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/d0c008e11fd55c6b1be57d63a3375f3f.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/UCC27528D/alternatives.json"},"ai":{"faq":[{"question":"What is the difference between the UCC27528D and the UCC27527D?","answer":"The UCC27528D has non-inverting inputs on both channels, while the UCC27527D has one inverting and one non-inverting input. Both are otherwise identical in drive current, speed, supply range, and package. The choice depends on whether your system needs an inverted gate signal on one channel."},{"question":"What is the UCC27528D gate type and voltage supply rating?","answer":"The UCC27528D drives N-channel MOSFETs and IGBTs and operates from a 4.5V to 18V supply. The 5A peak source/sink current and 7ns/6ns rise/fall times are specified at the supply voltage used."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/UCC27528D","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/UCC27528D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}