{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"UCC27525DR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"UCC27525DR","canonicalUrl":"https://icboms.com/texas-instruments/UCC27525DR","factsUrl":"https://icboms.com/api/mcp/products/UCC27525DR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments UCC27525DR, dual low-side gate driver, 5A peak source/sink, 7ns rise/6ns fall, 4.5V–18V supply, inverting/non-inverting inputs, 8-SOIC, -40°C to 140°C TJ.","salesMarkdown":"## 5A peak drive, 7ns edges — the switching-speed anchor The UCC27525DR is a Texas Instruments dual low-side gate driver built for IGBT and N-channel MOSFET gates. That combination means you can slam a hefty gate charge on and off fast — think 30 nC to 50 nC FETs in a 100 kHz to 500 kHz SMPS or motor-drive stage — without the driver becoming the timing bottleneck. The 4.5V to 18V supply range covers both 5V-logic and standard 12V gate rails, and the 1V VIL / 2.3V VIH thresholds let a 3.3V or 5V controller talk directly, no level-shifter resistors needed. ## 140°C junction — where this part lives Rated for continuous operation up to 140°C junction temperature, the UCC27525DR handles the thermal load of a cramped industrial enclosure or an engine-bay power stage without forced airflow. The 8-SOIC package is a standard footprint, but at 5A peak edges the PCB layout matters: keep the gate-return loop tight, place the bypass cap within 5 mm of the VDD and GND pins, and watch the via inductance on the output trace. The independent channel topology means you can drive two FETs with separate PWM signals — useful for dual synchronous rectifiers or two interleaved phases — without cross-talk through a shared enable. ## Active, no LTB — current-production sourcing No last-time-buy clock is ticking, no end-of-life notice is on the table. The base product number is UCC27525; the DR suffix is the 8-SOIC tape-and-reel variant. Cut tape and full reels are both listed as package options. For volume production, the reel is the cost-efficient pick; for prototypes or small runs, cut tape avoids minimum-order friction.","metaTitle":"UCC27525DR Gate Driver, 5A Peak, 7ns Rise, 8-SOIC","metaDescription":"TI UCC27525DR dual low-side gate driver drives IGBT/N-ch MOSFET with 5A peak source/sink, 7ns rise/6ns fall. 4.5V–18V supply, -40°C to 140°C TJ. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Gate Type":"IGBT, N-Channel MOSFET","Input Type":"Inverting, Non-Inverting","Channel Type":"Independent","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"4.5V ~ 18V","Number of Drivers":"2","Base Product Number":"UCC27525","Driven Configuration":"Low-Side","Operating Temperature":"-40°C~140°C(TJ)","Rise / Fall Time (Typ)":"7ns, 6ns","Supplier Device Package":"8-SOIC","Logic Voltage - VIL, VIH":"1V, 2.3V","Current - Peak Output (Source, Sink)":"5A, 5A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.2200","priceTiers":[{"qty":1,"price":"$2.22000","currency":"USD"},{"qty":10,"price":"$1.99700","currency":"USD"},{"qty":25,"price":"$1.88400","currency":"USD"},{"qty":100,"price":"$1.60530","currency":"USD"},{"qty":250,"price":"$1.50732","currency":"USD"},{"qty":500,"price":"$1.31890","currency":"USD"},{"qty":1000,"price":"$1.09281","currency":"USD"},{"qty":2500,"price":"$1.06650","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/c70e9321bc0aa3c22e5d04f194fd7607.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/UCC27525DR/alternatives.json"},"ai":{"faq":[{"question":"Is UCC27525DR suitable for driving IGBTs?","answer":"Yes, the UCC27525DR is specified for both IGBT and N-channel MOSFET gates. The 5A peak source/sink and 7ns/6ns rise/fall times provide the fast, high-current drive needed to switch IGBTs in motor drives, inverters, and power supplies within the 4.5V to 18V supply range."},{"question":"UCC27525DR vs UCC27524: what's the difference?","answer":"The UCC27525DR and UCC27524 are both dual low-side gate drivers from TI with the same 5A peak drive and 8-SOIC package. The key difference is logic input configuration: the UCC27525DR provides one inverting and one non-inverting input per channel, while the UCC27524 has dual non-inverting inputs. Choose the UCC27525DR when you need complementary drive signals from a single PWM source without external inversion."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/UCC27525DR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/UCC27525DR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}