{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"UCC27425DG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"UCC27425DG4","canonicalUrl":"https://icboms.com/texas-instruments/UCC27425DG4","factsUrl":"https://icboms.com/api/mcp/products/UCC27425DG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments UCC27425DG4 dual low-side MOSFET driver, 4A peak output source and sink, 20ns rise / 15ns fall, drives N-channel and P-channel MOSFETs, 4V to 15V supply, -40 to 125°C, 8-SOIC package, Tube.","salesMarkdown":"## What this driver does on your board Each of the two independent channels can be configured for inverting or non-inverting input, giving you polarity flexibility without extra logic. The 20 ns rise and 15 ns fall times (typical) mean the driver can charge and discharge the gate capacitance fast enough to keep switching losses in check for converters running into the hundreds of kilohertz. The supply range is 4 V to 15 V, which covers the bias rails of most PWM controllers and secondary-side regulators. The body is small enough that a hot-air station with a medium nozzle lifts it cleanly when the board is preheated to 100°C. The Tube shipping medium is fine for bench quantities; if you need reels for production, the D suffix in the order code tells you it is the tube variant.","metaTitle":"UCC27425DG4 MOSFET Driver, 4A Peak, Low-Side, 8-SOIC","metaDescription":"TI UCC27425DG4 dual low-side MOSFET driver, 4A peak source/sink, 20ns/15ns rise/fall, drives N/P-channel, -40 to 125°C. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tube","Gate Type":"N-Channel, P-Channel MOSFET","Input Type":"Inverting, Non-Inverting","Channel Type":"Independent","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"4V ~ 15V","Number of Drivers":"2","Base Product Number":"UCC27425","Driven Configuration":"Low-Side","Operating Temperature":"-40°C~125°C(TA)","Rise / Fall Time (Typ)":"20ns, 15ns","Supplier Device Package":"8-SOIC","Logic Voltage - VIL, VIH":"1V, 2V","Current - Peak Output (Source, Sink)":"4A, 4A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/397b6f8b51161ed7835f3dbc91d4fd5d.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/UCC27425DG4/alternatives.json"},"ai":{"faq":[{"question":"What is the difference between UCC27425DG4 and UCC27424?","answer":"The UCC27424 is the same dual low-side driver family but with a different input logic threshold. The UCC27425DG4 uses 1 V (VIL) and 2 V (VIH) thresholds, while the UCC27424 uses 0.8 V and 2 V. The 1 V VIL on the '425 gives a wider noise margin for 3.3 V logic interfaces. Both parts are pin-compatible in the 8-SOIC package."},{"question":"Can UCC27425DG4 drive high-side MOSFETs?","answer":"No. The UCC27425DG4 is a low-side driver only. Its output is referenced to ground, so it cannot bootstrap a gate voltage above the supply rail. For high-side drive you need a bootstrap or isolated driver."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/UCC27425DG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/UCC27425DG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}