{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"UCC27200DRG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"UCC27200DRG4","canonicalUrl":"https://icboms.com/texas-instruments/UCC27200DRG4","factsUrl":"https://icboms.com/api/mcp/products/UCC27200DRG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments UCC27200DRG4, half-bridge gate driver, N-Channel MOSFET, 2 independent channels, 3A peak source/sink, 8V–17V supply, 8ns rise/7ns fall, 8-SOIC package, -40°C to 140°C junction.","salesMarkdown":"The 3 A peak source and sink current means it can charge and discharge the gate capacitance of a large FET fast enough to keep switching losses under control — think a 100 nC gate charge switching at 100 kHz needs about 0.3 A average, so this driver has headroom for even bigger dies or higher frequencies. ## Supply range and bootstrap ceiling — where it fits The 8 V to 17 V supply range covers the standard bias rails for 12 V gate-drive systems. The high-side bootstrap is rated to 120 V maximum, so this driver is at home in 48 V to 72 V bus converters, motor drives, and telecom DC-DC stages — but not for a 400 V inverter. The logic input thresholds of 3 V (VIL) and 8 V (VIH) are compatible with 5 V and 3.3 V PWM controllers from most MCUs and DSPs. ## Switching speed and layout reality The trade-off: those edges demand a tight layout — the gate loop inductance must stay low or the ringing will exceed the 20 V absolute-max gate rating of the MOSFET. A local bootstrap capacitor and a 1 µF decoupling cap within 5 mm of the supply pins are standard practice with this driver.","metaTitle":"UCC27200DRG4 Half-Bridge Gate Driver, 3A Peak, 8-SOIC","metaDescription":"Texas Instruments UCC27200DRG4 half-bridge MOSFET driver with 3A peak output, 8V–17V supply, 8ns rise/7ns fall.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR)","Gate Type":"N-Channel MOSFET","Input Type":"Non-Inverting","Channel Type":"Independent","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"8V ~ 17V","Number of Drivers":"2","Base Product Number":"UCC27200","Driven Configuration":"Half-Bridge","Operating Temperature":"-40°C~140°C(TJ)","Rise / Fall Time (Typ)":"8ns, 7ns","Supplier Device Package":"8-SOIC","Logic Voltage - VIL, VIH":"3V, 8V","High Side Voltage - Max (Bootstrap)":"120 V","Current - Peak Output (Source, Sink)":"3A, 3A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/24ae9c137f7b7307eac459344ef51987.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/UCC27200DRG4/alternatives.json"},"ai":{"faq":[{"question":"Does the UCC27200DRG4 require a bootstrap diode?","answer":"The UCC27200DRG4 integrates the bootstrap diode internally. No external high-voltage diode is needed for the bootstrap supply — just a capacitor between the HB and HS pins."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/UCC27200DRG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/UCC27200DRG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}