{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"UCC27200DDAR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"UCC27200DDAR","canonicalUrl":"https://icboms.com/texas-instruments/UCC27200DDAR","factsUrl":"https://icboms.com/api/mcp/products/UCC27200DDAR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments UCC27200DDAR, half-bridge N-channel MOSFET gate driver, 3A peak source/sink, 8ns rise / 7ns fall, 8V~17V supply, 120V bootstrap, 8-SO PowerPad, -40°C~140°C.","salesMarkdown":"## Half-bridge driver with 3 A peak drive and 120 V bootstrap ceiling The 8 ns typical rise time and 7 ns fall time let it drive the gate charge of a medium-power FET fast enough to keep cross-conduction dead-time short in a 100–500 kHz switching converter. The bootstrap high-side supply is rated to 120 V maximum, so the part fits 48 V bus converters, 72 V telecom bricks, and motor-drive rails up to about 100 V nominal. The supply range runs from 8 V to 17 V, which covers the common 12 V bias rail used in industrial and automotive auxiliary supplies. ## 8-SO PowerPad — thermal and layout reality The 8-PowerSOIC package (3.90 mm width) with an exposed thermal pad — TI calls it the PowerPad — demands a copper land on the PCB with thermal vias to the ground plane. Without that pad soldered down, the junction-to-ambient thermal resistance climbs and the 140°C maximum junction temperature becomes hard to hold at full 3 A switching current. The sibling UCC27201 differs in the logic input threshold polarity — the UCC27201 has an enable function — but both share the same 3 A drive and 120 V bootstrap rating.","metaTitle":"UCC27200DDAR Half-Bridge Gate Driver, 3A Peak","metaDescription":"Texas Instruments UCC27200DDAR half-bridge N-channel MOSFET driver. 3A peak source/sink, 8ns/7ns rise/fall, 120V bootstrap max, 8-SO PowerPad.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR)","Gate Type":"N-Channel MOSFET","Input Type":"Non-Inverting","Channel Type":"Independent","Mounting Type":"Surface Mount","Package / Case":"8-PowerSOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"8V ~ 17V","Number of Drivers":"2","Base Product Number":"UCC27200","Driven Configuration":"Half-Bridge","Operating Temperature":"-40°C~140°C(TJ)","Rise / Fall Time (Typ)":"8ns, 7ns","Supplier Device Package":"8-SO PowerPad","Logic Voltage - VIL, VIH":"3V, 8V","High Side Voltage - Max (Bootstrap)":"120 V","Current - Peak Output (Source, Sink)":"3A, 3A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.4700","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/24ae9c137f7b7307eac459344ef51987.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/UCC27200DDAR/alternatives.json"},"ai":{"faq":[{"question":"What is the difference between UCC27200 and UCC27201?","answer":"The UCC27201 adds an enable function on one of the input pins. Both parts share the same 3 A peak drive, 120 V bootstrap rating, and 8-SO PowerPad package. The logic input threshold polarity is the same; the enable pin on the UCC27201 lets you shut down both outputs with a single logic signal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/UCC27200DDAR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/UCC27200DDAR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}