{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"UCC27200DDAG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"UCC27200DDAG4","canonicalUrl":"https://icboms.com/texas-instruments/UCC27200DDAG4","factsUrl":"https://icboms.com/api/mcp/products/UCC27200DDAG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments UCC27200DDAG4, half-bridge N-channel MOSFET driver, 3A peak source/sink, 8ns rise / 7ns fall typ, 8V~17V supply, 120V bootstrap, -40°C~140°C, 8-PowerSOIC package.","salesMarkdown":"## Half-bridge driver with 3 A peak drive and 120 V bootstrap The Texas Instruments UCC27200DDAG4 is a high-frequency half-bridge gate driver for N-channel MOSFETs. The bootstrap topology supports a high-side voltage up to 120 V, making this driver a fit for synchronous buck converters, full-bridge DC-DC stages, and class-D audio amplifiers operating from rails up to 100 V with margin. The supply range is 8 V to 17 V, which covers standard 12 V bias rails and leaves headroom for 15 V gate-drive levels. ## 140 °C junction — thermal margin for tight layouts In a power supply with the driver sitting next to a hot inductor or heatsink, that extra 15 °C of headroom means the part stays within its SOA without forced airflow. ## Logic thresholds and independent channels Input logic thresholds are 3 V (VIL) and 8 V (VIH), which means a 5 V PWM controller output drives the inputs directly — no level-shifting resistor network needed. The two channels are independent and non-inverting, so the same signal can drive both high-side and low-side with external dead-time circuitry, or each channel can run its own PWM stream. The base product number UCC272 covers a family of pin-compatible variants (UCC27201, UCC27201A) that differ in input thresholds or enable logic — if a future redesign needs a different logic interface, the footprint stays the same. ## Sourcing note — quoted to order per BOM line No stock-holding claim is made; the supply channel is flexible for both prototype volumes and production runs.","metaTitle":"Texas Instruments UCC27200DDAG4 MOSFET Driver, 3A Peak","metaDescription":"Texas Instruments UCC27200DDAG4 half-bridge N-channel MOSFET driver. 3A peak source/sink, 8ns rise/7ns fall typ, 120V bootstrap.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Bulk","Gate Type":"N-Channel MOSFET","Input Type":"Non-Inverting","Channel Type":"Independent","Mounting Type":"Surface Mount","Package / Case":"8-PowerSOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"8V ~ 17V","Number of Drivers":"2","Base Product Number":"UCC272","Driven Configuration":"Half-Bridge","Operating Temperature":"-40°C~140°C(TJ)","Rise / Fall Time (Typ)":"8ns, 7ns","Supplier Device Package":"8-SO PowerPad","Logic Voltage - VIL, VIH":"3V, 8V","High Side Voltage - Max (Bootstrap)":"120 V","Current - Peak Output (Source, Sink)":"3A, 3A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/24ae9c137f7b7307eac459344ef51987.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/UCC27200DDAG4/alternatives.json"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to UCC27200DDAG4?","answer":"Within the UCC2720x family, the UCC27201 and UCC27201A are pin-compatible alternatives. The UCC27201 has TTL-compatible input thresholds (2.2 V / 1.3 V) instead of the 3 V / 8 V thresholds on the UCC27200, which matters if the PWM controller runs on a 3.3 V rail. The UCC27201A adds an enable pin. All share the same 8-PowerSOIC footprint and 3 A drive capability."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/UCC27200DDAG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/UCC27200DDAG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}