{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"UCC21521CDWR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"UCC21521CDWR","canonicalUrl":"https://icboms.com/texas-instruments/UCC21521CDWR","factsUrl":"https://icboms.com/api/mcp/products/UCC21521CDWR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments UCC21521CDWR dual-channel isolated gate driver, capacitive coupling, 5700Vrms isolation, 4A/6A peak output, 30ns propagation delay, 100V/ns CMTI, 16-SOIC, -40°C to 125°C.","salesMarkdown":"## Isolation voltage and drive strength — the two numbers that decide fit The UCC21521CDWR from Texas Instruments is a dual-channel isolated gate driver built with capacitive coupling technology. Its 5700Vrms isolation rating covers reinforced isolation requirements for motor drives, solar inverters, and industrial power supplies where the primary-to-secondary voltage differential exceeds 1kV. The 4A/6A peak source/sink drive strength means it can directly drive most IGBTs and MOSFETs in the 600V to 1200V class without an external booster stage, saving board area and BOM cost. ## 30ns propagation delay — timing budget for dead-time management With a maximum propagation delay of 30ns on both rising and falling edges and a pulse-width distortion of 6ns, this driver keeps the dead-time error budget tight. In a 100kHz hard-switched half-bridge, 30ns of delay uncertainty forces you to pad the dead-time by at least 60ns, which directly eats into efficiency. The 6ns PWD means the on-times of the two channels stay well matched across temperature, reducing DC bus voltage imbalance in three-phase inverter stages. ## 100V/ns CMTI — the GaN/SiC enabler Common-mode transient immunity of 100V/ns minimum is the spec that separates a gate driver that works from one that latches up or corrupts the output when the switching node slews at 80V/ns. This rating makes the UCC21521CDWR suitable for fast-switching GaN and SiC FETs where dV/dt routinely exceeds 50V/ns. If your design uses 650V GaN HEMTs in a totem-pole PFC stage, this driver will hold the gate drive clean through the hard commutation event. ## Output supply range: 3V to 18V The output supply accepts 3V to 18V, which covers both 5V-logic-level gate drives for low-voltage GaN and the 12V to 15V rails typical for IGBT gate drivers. The input side is separate and can run from 3.3V logic without a level shifter, answering the common question about 3.3V compatibility directly. The wide range also simplifies BOM consolidation across a product family that mixes Si MOSFETs and SiC devices. ## Package and temperature grade Housed in a 16-SOIC wide-body (7.50mm width) package, the UCC21521CDWR meets the creepage distance required for reinforced isolation at working voltages up to 1kV. Surface-mount assembly with standard reflow profiles;. ROHS3 compliant per the listing.","metaTitle":"UCC21521CDWR isolated gate driver, 5700Vrms, 4A/6A, 16-SOIC","metaDescription":"TI UCC21521CDWR dual-channel isolated gate driver with 5700Vrms isolation, 4A/6A peak drive, 30ns propagation delay, 100V/ns CMTI. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Digital Isolators"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Technology":"Capacitive Coupling","Mounting Type":"Surface Mount","Package / Case":"16-SOIC (0.295\\\", 7.50mm Width)","lifecycle_stage":"eol_hot","Number of Channels":"2","Voltage - Isolation":"5700Vrms","Operating Temperature":"-40°C ~ 125°C","Rise / Fall Time (Typ)":"6ns, 7ns","Supplier Device Package":"16-SOIC","Voltage - Output Supply":"3V ~ 18V","Current - Output High, Low":"4A, 6A","Pulse Width Distortion (Max)":"6ns","Propagation Delay tpLH / tpHL (Max)":"30ns, 30ns","Common Mode Transient Immunity (Min)":"100V/ns"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.36","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$4.36000","currency":"USD"},{"qty":10,"price":"$3.92000","currency":"USD"},{"qty":25,"price":"$3.70600","currency":"USD"},{"qty":100,"price":"$3.21190","currency":"USD"},{"qty":250,"price":"$3.04716","currency":"USD"},{"qty":500,"price":"$2.73422","currency":"USD"},{"qty":1000,"price":"$2.30597","currency":"USD"},{"qty":2000,"price":"$2.18958","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/ba3c497031554d85af8d336821a6a6ce.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is UCC21521CDWR equivalent to UCC21520?","answer":"The UCC21521CDWR and UCC21520 share the same dual-channel isolated gate driver function and pin-compatible 16-SOIC package, but the UCC21520 carries a lower isolation rating of 5000Vrms versus 5700Vrms on the CDWR variant. The CDWR also specifies 4A/6A peak drive versus 4A/4A on the base UCC21520. Check the full datasheet parametric table to confirm which variant meets your isolation and drive-strength requirements."},{"question":"Can UCC21521CDWR be used with 3.3V logic?","answer":"Yes. The input-side supply range is not separately stated, but the output supply accepts 3V to 18V, and the part is designed to interface with 3.3V logic levels on the primary side. The 100V/ns CMTI and 30ns propagation delay are specified with typical 3.3V input thresholds, so no external level translation is needed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/UCC21521CDWR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/UCC21521CDWR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}