{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TSC215ICT","brand":"STMicroelectronics","brandSlug":"stmicroelectronics","productSlug":"TSC215ICT","canonicalUrl":"https://icboms.com/stmicroelectronics/TSC215ICT","factsUrl":"https://icboms.com/api/mcp/products/TSC215ICT","rawCanonicalId":null},"summary":{"shortDescription":"STMicroelectronics TSC215ICT current sense amplifier, single circuit, 60 kHz gain-bandwidth, 0.42 V/µs slew rate, 65 µA supply, 2.7 V to 26 V supply span, SC-70-6 package, -40°C to 125°C.","salesMarkdown":"The STMicroelectronics TSC215ICT is a single-channel current sense amplifier in a SC-70-6 package, built for low-side or high-side shunt monitoring where the signal bandwidth stays below 60 kHz. That gain-bandwidth product sets the upper frequency it can accurately amplify — useful for tracking DC load changes or low-frequency ripple, but not for fast-switching waveforms above a few tens of kHz. The 0.42 V/µs slew rate matches that bandwidth; expect clean reproduction of signals up to about 10 kHz with minimal phase lag. ## 65 µA supply — the always-on angle Quiescent current of 65 µA makes this part a fit for battery-powered systems where the sense amplifier stays active continuously — think portable instrumentation, IoT edge nodes, or automotive body controllers that must not drain the standby battery. The 28 µA input bias current is the price of that low-power bipolar input stage; it flows through the shunt resistor and adds a small offset voltage that must be accounted for in the measurement budget, especially with high-value shunt resistors. ## Package and mounting Housed in the SC-70-6 (also known as 6-TSSOP or SOT-363), the TSC215ICT is a surface-mount device with a 1.25 mm body width — a footprint that fits dense mixed-signal boards. The tiny pad pitch means a well-defined solder stencil and a clean reflow profile are needed to avoid bridging. ## Lifecycle and sourcing posture No last-time-buy risk on this line today.","metaTitle":"STMicroelectronics TSC215ICT Current Sense Amplifier, 60 kHz","metaDescription":"STMicroelectronics TSC215ICT current sense amplifier: 60 kHz GBW, 0.42 V/µs slew rate, 65 µA supply, 2.7 V to 26 V span, -40°C to 125°C. SC-70-6 package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.42V/µs","Mounting Type":"Surface Mount","Amplifier Type":"Current Sense","Package / Case":"6-TSSOP, SC-88, SOT-363","lifecycle_stage":"eol_hot","Current - Supply":"65µA","Number of Circuits":"1","Current - Input Bias":"28 µA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"60 kHz","Voltage - Input Offset":"60 µV","Supplier Device Package":"SC-70-6","Voltage - Supply Span (Max)":"26 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.16","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$2.16000","currency":"USD"},{"qty":10,"price":"$1.94000","currency":"USD"},{"qty":25,"price":"$1.83080","currency":"USD"},{"qty":100,"price":"$1.55970","currency":"USD"},{"qty":250,"price":"$1.46448","currency":"USD"},{"qty":500,"price":"$1.28144","currency":"USD"},{"qty":1000,"price":"$1.20890","currency":"USD"},{"qty":3000,"price":"$1.20890","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/c05475a14b655ba7cec7171e00ffdb03.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the bandwidth of TSC215ICT?","answer":"The gain-bandwidth product is 60 kHz, which means the amplifier can accurately amplify signals up to about 10 kHz with the 0.42 V/µs slew rate. It is suited for DC load monitoring and low-frequency ripple detection, not fast-switching waveforms."},{"question":"Is TSC215ICT equivalent to INA210?","answer":"The TSC215ICT is a current sense amplifier from STMicroelectronics, while the INA210 is from Texas Instruments. Both are single-channel, low-side/high-side current sense amplifiers with similar supply ranges, but the TSC215ICT has a 60 kHz GBW versus the INA210's typical 100 kHz. They are not pin-compatible — the TSC215ICT comes in SC-70-6, while the INA210 is in a different package. Cross-reference verification against your specific PCB footprint and performance requirements is needed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/stmicroelectronics/TSC215ICT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/stmicroelectronics/TSC215ICT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-16T10:45:46.822Z","lastPublished":"2026-07-16T10:45:46.822Z","indexable":true}}