{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TSC210IYCT","brand":"STMicroelectronics","brandSlug":"stmicroelectronics","productSlug":"TSC210IYCT","canonicalUrl":"https://icboms.com/stmicroelectronics/TSC210IYCT","factsUrl":"https://icboms.com/api/mcp/products/TSC210IYCT","rawCanonicalId":null},"summary":{"shortDescription":"STMicroelectronics TSC210IYCT, Current Sense Amplifier, 1 Circuit, Push-Pull Output, 25 kHz GBWP, 0.2 V/µs Slew Rate, 2.7 V to 26 V Supply, SC-70-6, -40°C to 125°C.","salesMarkdown":"## Dedicated current-sense amplifier in a tiny SC-70-6 The STMicroelectronics TSC210IYCT is a single-channel current-sense amplifier designed to measure current by sensing the voltage drop across a shunt resistor. The supply span from 2.7 V to 26 V means it can run directly off a 3.3 V logic rail or a 24 V industrial bus without an intermediate regulator, which simplifies the power tree. For a current-sense application, this means the TSC210IYCT can accurately reproduce DC shunt voltages and low-frequency ripple (say, 50/60 Hz line monitoring or PWM current at a few kHz), but it will start to roll off well before any switching-node edge rates. If your design needs to capture sub-microsecond current spikes or high-frequency load transients, you would look at a faster part like the TSC212ICT with its 0.5 V/µs slew rate. For steady-state current monitoring, battery charge/discharge tracking, or overcurrent detection in motor drives, the 25 kHz bandwidth is adequate and the low 65 µA supply current keeps the quiescent overhead minimal. ## Supply voltage range: 2.7 V to 26 V — one part for multiple rail voltages The wide supply span from 2.7 V to 26 V is the standout feature for BOM consolidation. It covers 3.3 V and 5 V logic rails, 12 V automotive battery lines, and 24 V industrial supplies without a secondary regulator. The input offset voltage is rated at 35 µV, which, combined with the 28 µA input bias current, gives good DC accuracy for low-side or high-side sensing as long as the shunt voltage is in the tens of millivolts range. The 65 µA supply current makes it viable for always-on monitoring in battery-powered equipment. ## Package and footprint: SC-70-6 The TSC210IYCT comes in a 6-lead SC-70 package (also known as SOT-363), with the supplier device package designated SC-70-6. It is a surface-mount part, so the board layout needs the standard 0.65 mm pitch footprint. The small body saves board area — useful when you are packing multiple current-sense channels into a dense design. The shipping options are Tape & Reel or Cut Tape, which suits both prototyping and production pick-and-place.","metaTitle":"STMicroelectronics TSC210IYCT Current Sense Amplifier","metaDescription":"STMicroelectronics TSC210IYCT current sense amplifier: 25 kHz GBWP, 0.2 V/µs slew rate, 2.7 V to 26 V supply, -40°C to 125°C, SC-70-6. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.2V/µs","Output Type":"Push-Pull","Mounting Type":"Surface Mount","Amplifier Type":"Current Sense","Package / Case":"6-TSSOP, SC-88, SOT-363","lifecycle_stage":"eol_hot","Current - Supply":"65µA","Number of Circuits":"1","Current - Input Bias":"28 µA","Operating Temperature":"-40°C ~ 125°C (TA)","Gain Bandwidth Product":"25 kHz","Voltage - Input Offset":"35 µV","Supplier Device Package":"SC-70-6","Voltage - Supply Span (Max)":"26 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.47","priceTiers":[{"qty":1,"price":"$2.47000","currency":"USD"},{"qty":10,"price":"$2.21800","currency":"USD"},{"qty":25,"price":"$2.09240","currency":"USD"},{"qty":100,"price":"$1.78280","currency":"USD"},{"qty":250,"price":"$1.67396","currency":"USD"},{"qty":500,"price":"$1.46472","currency":"USD"},{"qty":1000,"price":"$1.21363","currency":"USD"},{"qty":3000,"price":"$1.12993","currency":"USD"},{"qty":6000,"price":"$1.08808","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/2d947b7552714c656bfcde75b8cb203b.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TSC210IYCT/alternatives.json"},"ai":{"faq":[{"question":"What is the TSC210IYCT gain bandwidth product and slew rate?","answer":"These figures indicate the part is suited for DC and low-frequency current monitoring, not high-speed transient capture."},{"question":"Is the TSC210IYCT RoHS compliant?","answer":"Yes, the TSC210IYCT is ROHS3 compliant, meeting current EU RoHS requirements without lead or other restricted substances."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/stmicroelectronics/TSC210IYCT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/stmicroelectronics/TSC210IYCT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}