{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TS924AIPT","brand":"STMicroelectronics","brandSlug":"stmicroelectronics","productSlug":"TS924AIPT","canonicalUrl":"https://icboms.com/stmicroelectronics/TS924AIPT","factsUrl":"https://icboms.com/api/mcp/products/TS924AIPT","rawCanonicalId":null},"summary":{"shortDescription":"STMicroelectronics TS924AIPT quad general-purpose op-amp, 4 MHz gain-bandwidth, 1.3 V/µs slew rate, rail-to-rail output, AEC-Q100, 14-TSSOP package.","salesMarkdown":"## 4 MHz GBW and 1.3 V/µs slew rate — signal bandwidth ceiling The TS924AIPT is a quad general-purpose op-amp from STMicroelectronics with a 4 MHz gain-bandwidth product and 1.3 V/µs slew rate. That GBW means the open-loop gain holds flat up to about 4 kHz at a closed-loop gain of 1000 — beyond that, the gain rolls off at 20 dB/decade. The slew rate of 1.3 V/µs limits the full-power bandwidth: a 1 V peak output swing starts slewing above about 200 kHz, so keep the signal amplitude in check if you need clean edges at higher frequencies. With rail-to-rail output and a supply span from 2.7 V to 12 V, this part runs on a single 3.3 V or 5 V rail without needing a negative supply — common in automotive sensor interfaces where the ADC reference is the same rail. The 80 mA output per channel can drive a multiplexed ADC input or a small relay coil directly, though the thermal limit in the 14-TSSOP package will constrain continuous drive at the high end. ## AEC-Q100 Grade 1 — under-hood temperature tolerance Qualified to AEC-Q100 with an operating temperature range of -40°C to 125°C, the TS924AIPT is rated for Grade 1 automotive environments — engine bay, transmission control, or any location where the ambient hits 125°C. The 15 nA input bias current and 900 µV input offset voltage are typical for a general-purpose bipolar stage; at 125°C the bias current roughly doubles every 10°C, so budget for 1-2 µA of input current in a high-temperature sensor front-end. ## Quad-channel density for multi-sensor conditioning Four circuits in a single 14-TSSOP package save board space compared to four single op-amps. Each channel draws 1 mA supply current, so the total quiescent draw is 4 mA — negligible in a 12 V automotive system but worth noting in a battery-backed module. The 80 mA output per channel can source or sink enough current to drive a 100 nF capacitive load with reasonable stability; heavier loads may need a series resistor to keep the phase margin above 45°.","metaTitle":"STMicroelectronics TS924AIPT Op-Amp, 4 MHz, AEC-Q100","metaDescription":"TS924AIPT quad rail-to-rail op-amp, 4 MHz GBW, 1.3 V/µs slew rate, AEC-Q100 Grade 1, 14-TSSOP. Active production, ROHS3. Request a quote.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Grade":"Automotive","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"1.3V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Qualification":"AEC-Q100","Amplifier Type":"General Purpose","Package / Case":"14-TSSOP (0.173\\\", 4.40mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1mA","Number of Circuits":"4","Current - Input Bias":"15 nA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"4 MHz","Voltage - Input Offset":"900 µV","Supplier Device Package":"14-TSSOP","Current - Output / Channel":"80 mA","Voltage - Supply Span (Max)":"12 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.56","priceTiers":[{"qty":1,"price":"$3.56000","currency":"USD"},{"qty":10,"price":"$3.19900","currency":"USD"},{"qty":25,"price":"$3.02400","currency":"USD"},{"qty":100,"price":"$2.62080","currency":"USD"},{"qty":250,"price":"$2.48640","currency":"USD"},{"qty":500,"price":"$2.23106","currency":"USD"},{"qty":1000,"price":"$1.88161","currency":"USD"},{"qty":2500,"price":"$1.78753","currency":"USD"},{"qty":5000,"price":"$1.72033","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/3099351c1efeb20947818dcd74a3e0f5.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TS924AIPT/alternatives.json"},"ai":{"faq":[{"question":"Will TS924AIPT drop into a board designed for TS924AIDT?","answer":"The TS924AIDT shares the same die — same 4 MHz GBW, same 1.3 V/µs slew rate, same AEC-Q100 qualification. The difference is the package: TS924AIDT comes in a 14-SOIC, while TS924AIPT is 14-TSSOP. The pinout is identical, so the electrical function is a direct swap, but the footprint is different — the TSSOP has a 0.65 mm pitch versus the SOIC's 1.27 mm. A board layout change is required."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/stmicroelectronics/TS924AIPT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/stmicroelectronics/TS924AIPT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}