{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TS27L2IDT","brand":"STMicroelectronics","brandSlug":"stmicroelectronics","productSlug":"TS27L2IDT","canonicalUrl":"https://icboms.com/stmicroelectronics/TS27L2IDT","factsUrl":"https://icboms.com/api/mcp/products/TS27L2IDT","rawCanonicalId":null},"summary":{"shortDescription":"STMicroelectronics TS27L2IDT CMOS operational amplifier, dual channel, 100 kHz gain bandwidth, 0.04 V/µs slew rate, 10 µA supply per channel, 8-SOIC package, Tape & Reel.","salesMarkdown":"## 100 kHz CMOS op-amp for low-frequency sensor conditioning The STMicroelectronics TS27L2IDT is a dual-channel CMOS operational amplifier with a gain-bandwidth product of 100 kHz, making it suitable for conditioning signals from slow sensors like thermocouples, strain gauges, or photodiodes where the signal bandwidth stays well below the audio range. Each amplifier draws 10 µA of supply current, so the dual package consumes 20 µA total quiescent — this is the defining spec for battery-powered or energy-harvesting designs where every microamp counts. The input offset voltage is 1.1 mV typical — for a 10 mV full-scale sensor signal this represents an 11% offset error that must be calibrated out in software or trimmed with a reference voltage at the non-inverting input. ## Package and lifecycle for BOM planning The part is ROHS3 compliant, so it meets the current restriction on hazardous substances for European and global markets.","metaTitle":"STMicroelectronics TS27L2IDT CMOS Op-Amp, 100 kHz, 8-SOIC","metaDescription":"STMicroelectronics TS27L2IDT dual CMOS op-amp, 100 kHz GBP, 0.04 V/µs slew rate, 10 µA supply per channel. Active, ROHS3, -40 to 125°C. Request a quote.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.04V/µs","Mounting Type":"Surface Mount","Amplifier Type":"CMOS","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"10µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"1 pA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"100 kHz","Voltage - Input Offset":"1.1 mV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"45 mA","Voltage - Supply Span (Max)":"16 V","Voltage - Supply Span (Min)":"3 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.25","priceTiers":[{"qty":1,"price":"$1.25000","currency":"USD"},{"qty":10,"price":"$1.11300","currency":"USD"},{"qty":25,"price":"$1.05640","currency":"USD"},{"qty":100,"price":"$0.86780","currency":"USD"},{"qty":250,"price":"$0.81120","currency":"USD"},{"qty":500,"price":"$0.71686","currency":"USD"},{"qty":1000,"price":"$0.62290","currency":"USD"},{"qty":2500,"price":"$0.62290","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/f87d3c99e4415176b0a8dba66dc19d66.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TS27L2IDT/alternatives.json"},"ai":{"faq":[{"question":"Will the TS27L2IDT drop into a board designed for the TS27L2BIDT?","answer":"Yes — both parts share the same 8-SOIC package, pinout, supply range, and 100 kHz gain-bandwidth. The TS27L2BIDT specifies a lower 250 µV input offset voltage versus 1.1 mV on the TS27L2IDT, so the TS27L2IDT may require software calibration or a trim circuit if the original design relied on the tighter offset."},{"question":"What is the TS27L2IDT's slew rate and why does it matter?","answer":"The slew rate is 0.04 V/µs. This means the output voltage can change at most 40 mV per microsecond — for a 1 V peak output, the maximum undistorted sine wave frequency is about 6.4 kHz. Signals above that will show slew-induced distortion, so this op-amp is best for low-frequency sensor conditioning, not audio or fast control loops."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/stmicroelectronics/TS27L2IDT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/stmicroelectronics/TS27L2IDT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}