{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TPS2501DRCT","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TPS2501DRCT","canonicalUrl":"https://icboms.com/texas-instruments/TPS2501DRCT","factsUrl":"https://icboms.com/api/mcp/products/TPS2501DRCT","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TPS2501DRCT USB power switch, 2-channel, high-side or low-side, 80 mOhm typ Rds(on), 1.4 A max per output, integrated boost converter, adjustable current limit, 10-VSON (3x3 mm) package.","salesMarkdown":"## Why the boost converter matters for a USB switch The TPS2501DRCT integrates a boost converter to generate a gate-drive voltage above the input rail for its N-channel pass FETs. Without that internal boost, a standard N-channel switch would need an external charge pump or a higher supply rail to achieve the same on-resistance. ## Two outputs, one small footprint Two independent outputs, each rated for 1.4 A continuous, share the 10-VSON (3x3 mm) exposed-pad package. The 1:2 input-to-output ratio means a single upstream rail feeds both channels. The output configuration can be high-side or low-side, which gives flexibility for power-rail sequencing or load-switching on either the Vbus or ground side of a USB port. ## Fault protection that covers the common failure modes Adjustable current limiting lets you set the trip threshold per design, not just a fixed hard limit. The status flag output reports fault conditions back to the system controller.","metaTitle":"TPS2501DRCT Texas Instruments USB Power Switch, 1.4 A","metaDescription":"TPS2501DRCT USB switch with integrated boost converter, 80 mOhm Rds(on), 1.4 A per channel, adjustable current limit, active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Features":"Boost Converter, Status Flag","Interface":"Logic","Input Type":"Non-Inverting","Output Type":"N/P-Channel","Switch Type":"USB Switch","Rds On (Typ)":"80mOhm","Mounting Type":"Surface Mount","Package / Case":"10-VFDFN Exposed Pad","Product Status":"Active","Voltage - Load":"1.8V ~ 5.25V","lifecycle_stage":"eol_hot","Fault Protection":"Current Limiting (Adjustable), Over Temperature, UVLO","Number of Outputs":"2","Base Product Number":"TPS2501","Output Configuration":"High Side or Low Side","Ratio - Input:Output":"1:2","Operating Temperature":"-40°C~125°C(TJ)","Current - Output (Max)":"1.4A","Supplier Device Package":"10-VSON (3x3)","Voltage - Supply (Vcc/Vdd)":"Not Required"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.5300","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/6b93f5e2d007c9ecc545c32f9cd80308.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TPS2501DRCT/alternatives.json"},"ai":{"faq":[{"question":"Is TPS2501DRCT compatible with 3.3 V logic?","answer":"The control interface is logic-level compatible (input type is non-inverting, interface is Logic), and the supply voltage range covers 3.3 V rails. The status flag output is an open-drain signal that pulls low on fault — it requires a pull-up resistor to the host logic voltage."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TPS2501DRCT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TPS2501DRCT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}