{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TPS2331ID","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TPS2331ID","canonicalUrl":"https://icboms.com/texas-instruments/TPS2331ID","factsUrl":"https://icboms.com/api/mcp/products/TPS2331ID","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TPS2331ID, Hot Swap Controller, single-channel, 3V–13V supply, 500 µA supply current, programmable circuit breaker/fault timeout/slew rate, UVLO, latched fault, 14-SOIC surface mount, -40°C–85°C.","salesMarkdown":"## What the TPS2331ID is and where it fits The Texas Instruments TPS2331ID is a single-channel hot swap controller in a 14-SOIC package. It manages the inrush current and protects the downstream load during board insertion into a live backplane, using an external N-channel MOSFET — the controller itself contains no internal switch. The part is rated for a 3V to 13V supply rail, drawing 500 µA quiescent current, and operates over the industrial -40°C to 85°C range. Typical applications include general-purpose hot-swap and power-sequencing in telecom line cards, base stations, server blades, and industrial backplanes where a controlled power-up prevents glitches and connector damage. ## Programmable protection — what the features mean for your design The TPS2331ID integrates three programmable functions: circuit breaker threshold, fault timeout, and slew rate. The circuit breaker sets the overcurrent trip point; the fault timeout defines how long the controller waits before latching off after a fault; the slew rate controls how fast the output voltage ramps up, which directly limits the inrush current into bulk capacitance on the load side. These are set with external resistors and a capacitor — no digital interface, so the design is fixed once the BOM is locked. The latched-fault behaviour means the controller stays off after a trip until the input power is cycled or the enable signal is toggled, which is the right response for a hard overcurrent or short on the output. The UVLO (undervoltage lockout) prevents the MOSFET from turning on until the input rail is high enough to guarantee proper gate drive. ## Supply voltage and 12V system fit The 3V to 13V supply range covers the common 3.3V, 5V, and 12V rails found in most backplane and line-card designs. For a 12V hot-swap application, the TPS2331ID is a direct fit — the 13V upper bound provides headroom above a nominal 12V rail, though it will not tolerate a 15V or 24V bus. The 500 µA supply current is low enough to keep the controller's own draw negligible in the system power budget, even in battery-backed or always-on slots. ## Package and mounting The TPS2331ID comes in a 14-SOIC (0.154\" body width, 3.90 mm) surface-mount package. The wide-body SOIC footprint is standard and easy to inspect. ## Lifecycle and sourcing reality The TPS2331ID carries an Active lifecycle status and is ROHS3 compliant. No pin-compatible second source is documented in available records.","metaTitle":"TPS2331ID Hot Swap Controller, 3V–13V, 14-SOIC","metaDescription":"TI TPS2331ID hot swap controller, 3V to 13V supply, 500 µA quiescent, programmable circuit breaker & slew rate, 14-SOIC. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Type":"Hot Swap Controller","Package":"Tube","Features":"Latched Fault, UVLO","Applications":"General Purpose","Mounting Type":"Surface Mount","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"500 µA","Voltage - Supply":"3V ~ 13V","Internal Switch(s)":"No","Number of Channels":"1","Operating Temperature":"-40°C ~ 85°C","Programmable Features":"Circuit Breaker, Fault Timeout, Slew Rate","Supplier Device Package":"14-SOIC"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.13","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$4.13000","currency":"USD"},{"qty":10,"price":"$3.70900","currency":"USD"},{"qty":25,"price":"$3.50600","currency":"USD"},{"qty":100,"price":"$3.03850","currency":"USD"},{"qty":250,"price":"$2.88268","currency":"USD"},{"qty":500,"price":"$2.58662","currency":"USD"},{"qty":1000,"price":"$2.20500","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/b502227ea5574f9f1d228be96bef2ef6.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can TPS2331ID be used for hot swap in 12V systems?","answer":"Yes, the 3V to 13V supply range covers 12V rails with headroom, making the TPS2331ID a direct fit for 12V hot-swap applications."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TPS2331ID","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TPS2331ID when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}