{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TPS22965DSGT","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TPS22965DSGT","canonicalUrl":"https://icboms.com/texas-instruments/TPS22965DSGT","factsUrl":"https://icboms.com/api/mcp/products/TPS22965DSGT","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TPS22965DSGT, high-side load switch, N-channel, 16 mOhm typical Rds(on), 6 A max output, 2.5 V to 5.7 V load voltage, 8-WFDFN exposed pad, -40°C to 105°C.","salesMarkdown":"## 16 mOhm on-resistance — why it matters for the 6 A rail The headline number is the 16 mOhm typical on-resistance — at 6 A continuous output, that is under 0.6 W of conduction loss, which the exposed pad on the 8-WFDFN can sink without a heatsink in most layouts. ## Slew rate control and load discharge — what they do on the board Slew rate controlled turn-on limits inrush current into capacitive loads — useful when the switch feeds a bank of decoupling caps or a downstream regulator that would otherwise brown out the supply rail. The load discharge feature pulls the output to ground when the switch is off, preventing the output from floating at an indeterminate voltage that could hold a downstream IC in an undefined state. The bias supply (Vcc/Vdd) runs from 0.8 V to 5.7 V, which means the switch can be controlled by a 1.8 V logic signal from an MCU or FPGA without a level shifter.","metaTitle":"Texas Instruments TPS22965DSGT Load Switch, 16 mOhm, 6 A","metaDescription":"Texas Instruments TPS22965DSGT load switch: 16 mOhm Rds(on), 6 A max, 2.5-5.7 V load range, -40 to 105°C, active.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Features":"Load Discharge, Slew Rate Controlled","Interface":"On/Off","Input Type":"Non-Inverting","Output Type":"N-Channel","Switch Type":"General Purpose","Rds On (Typ)":"16mOhm","Mounting Type":"Surface Mount","Package / Case":"8-WFDFN Exposed Pad","Product Status":"Active","Voltage - Load":"2.5V ~ 5.7V","lifecycle_stage":"eol_hot","Fault Protection":"-","Number of Outputs":"1","Base Product Number":"TPS22965","Output Configuration":"High Side","Ratio - Input:Output":"1:1","Operating Temperature":"-40°C~105°C(TA)","Current - Output (Max)":"6A","Supplier Device Package":"8-WSON (2x2)","Voltage - Supply (Vcc/Vdd)":"0.8V ~ 5.7V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.2600","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/fe629cb2733176d21b5592f6f7e89c0e.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TPS22965DSGT/alternatives.json"},"ai":{"faq":[{"question":"Does TPS22965DSGT support load discharge?","answer":"Yes, the part includes a load discharge feature. When the switch is turned off, an internal pull-down resistor discharges the output capacitance, preventing the output from floating."},{"question":"What is the typical application of TPS22965DSGT?","answer":"This load switch is used for power-rail sequencing, power gating, and inrush current limiting in systems running on 2.5 V to 5.7 V rails — think SSDs, routers, base stations, and industrial control modules where a 6 A rail needs clean on/off control."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TPS22965DSGT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TPS22965DSGT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}