{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TPS22965DSGR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TPS22965DSGR","canonicalUrl":"https://icboms.com/texas-instruments/TPS22965DSGR","factsUrl":"https://icboms.com/api/mcp/products/TPS22965DSGR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TPS22965DSGR, high-side load switch, 16 mOhm typ Rds(on), 6 A max, 2.5 V to 5.7 V load range, 8-WFDFN exposed pad, -40°C to 105°C.","salesMarkdown":"## High-side load switch with 16 mOhm Rds(on) It switches a load rail from 2.5 V to 5.7 V and is biased from a separate Vcc/Vdd pin spanning 0.8 V to 5.7 V. The 16 mOhm typical on-resistance at 6 A max output keeps conduction losses low — at full load the I²R dissipation is under 0.6 W, manageable with the exposed pad soldered to a copper plane. Built-in load discharge and slew rate control (features listed on the product line) manage turn-on inrush and ensure the output rail discharges cleanly when the switch is disabled. ## Supply rails and enable logic The load voltage (VIN) and the bias voltage (Vcc/Vdd) are independent: VIN accepts 2.5 V to 5.7 V, while Vcc/Vdd runs as low as 0.8 V. The On/Off interface is non-inverting — a high on the enable pin turns the switch on. The 1:1 input-to-output ratio means no level shifting or inversion on the control signal. ## Package and board mounting The pad carries the ground return for the bias circuit and pulls heat out of the die. Surface-mount assembly; the tape-and-reel and cut-tape options cover both production reel quantities and prototype pick quantities. For a high-volume power-rail switch, this means the BOM line can be committed without near-term obsolescence risk.","metaTitle":"TPS22965DSGR load switch, 16 mOhm, 6 A, 8-WSON","metaDescription":"Texas Instruments TPS22965DSGR high-side load switch: 16 mOhm Rds(on), 6 A max, 2.5-5.7 V load, 0.8-5.7 V bias.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Features":"Load Discharge, Slew Rate Controlled","Interface":"On/Off","Input Type":"Non-Inverting","Output Type":"N-Channel","Switch Type":"General Purpose","Rds On (Typ)":"16mOhm","Mounting Type":"Surface Mount","Package / Case":"8-WFDFN Exposed Pad","Product Status":"Active","Voltage - Load":"2.5V ~ 5.7V","lifecycle_stage":"eol_hot","Fault Protection":"-","Number of Outputs":"1","Base Product Number":"TPS22965","Output Configuration":"High Side","Ratio - Input:Output":"1:1","Operating Temperature":"-40°C~105°C(TA)","Current - Output (Max)":"6A","Supplier Device Package":"8-WSON (2x2)","Voltage - Supply (Vcc/Vdd)":"0.8V ~ 5.7V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.0500","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/fe629cb2733176d21b5592f6f7e89c0e.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TPS22965DSGR/alternatives.json"},"ai":{"faq":[{"question":"What is the typical Rds(on) of TPS22965DSGR?","answer":"The typical on-resistance is 16 mOhm. This is the conduction path resistance from input to output when the switch is enabled."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TPS22965DSGR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TPS22965DSGR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}