{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TPS22960RSET","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TPS22960RSET","canonicalUrl":"https://icboms.com/texas-instruments/TPS22960RSET","factsUrl":"https://icboms.com/api/mcp/products/TPS22960RSET","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TPS22960RSET dual-channel P-channel load switch, 342 mOhm typical Rds(on), 500 mA per channel, 1.62 V to 5.5 V load range, 8-UQFN (1.5x1.5) package, -40°C to 85°C.","salesMarkdown":"## Two 500 mA high-side channels in a 1.5 mm² footprint The switch is configured as a high-side output with a 1:1 input-to-output ratio, and the on/off control interface accepts a non-inverting logic signal. Built-in load discharge and slew-rate control prevent the output rail from floating when the switch is off and limit inrush current during turn-on — useful when sequencing multiple power domains on the same board. The typical on-resistance of 342 mOhm sets the voltage drop across the switch at full load: at 500 mA the drop is roughly 170 mV. For a 3.3 V output rail that leaves 3.13 V at the load — within the tolerance of most 3.3 V logic but worth checking if the downstream regulator margin is tight. The P-channel architecture means no Vcc supply is needed for the switch itself; the gate drive is derived from the load voltage. It is not rated for extended automotive or under-hood environments.","metaTitle":"TPS22960RSET dual load switch, 342 mOhm, 1.62-5.5V","metaDescription":"Texas Instruments TPS22960RSET dual-channel P-channel load switch. 342 mOhm typical Rds(on), 500 mA per channel, 1.62 V to 5.5 V load range. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Features":"Load Discharge, Slew Rate Controlled","Interface":"On/Off","Input Type":"Non-Inverting","Output Type":"P-Channel","Switch Type":"General Purpose","Rds On (Typ)":"342mOhm","Mounting Type":"Surface Mount","Package / Case":"8-UFQFN","Product Status":"Active","Voltage - Load":"1.62V ~ 5.5V","lifecycle_stage":"eol_hot","Fault Protection":"-","Number of Outputs":"2","Base Product Number":"TPS22960","Output Configuration":"High Side","Ratio - Input:Output":"1:1","Operating Temperature":"-40°C~85°C(TA)","Current - Output (Max)":"500mA","Supplier Device Package":"8-UQFN (1.5x1.5)","Voltage - Supply (Vcc/Vdd)":"Not Required"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.1900","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/1cc80d2d2ec2b456181b51b06c23316c.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TPS22960RSET/alternatives.json"},"ai":{"faq":[{"question":"Does TPS22960RSET have reverse current protection?","answer":"The evidence does not list reverse current protection as a feature. The switch is a P-channel high-side device with load discharge and slew-rate control; if reverse blocking is required, an external series diode or a load switch with that protection should be considered."},{"question":"Is TPS22960RSET compatible with 3.3 V logic?","answer":"Yes. The load voltage range of 1.62 V to 5.5 V includes 3.3 V, and the on/off control interface accepts a non-inverting logic signal. The input threshold is referenced to the load voltage, so a 3.3 V logic high will drive the switch on when the load is at 3.3 V or below."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TPS22960RSET","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TPS22960RSET when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}