{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TPS22925CNYPHR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TPS22925CNYPHR","canonicalUrl":"https://icboms.com/texas-instruments/TPS22925CNYPHR","factsUrl":"https://icboms.com/api/mcp/products/TPS22925CNYPHR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TPS22925CNYPHR load switch, high-side, N-channel, 9.2 mOhm typical Rds(on), 3 A max output, 0.65 V to 3.6 V load range, DSBGA-6 package, -40°C to 105°C.","salesMarkdown":"## 9.2 mOhm on-resistance — what it buys the rail The TPS22925CNYPHR: That on-resistance number is the headline spec: at 3 A output, conduction loss sits at roughly 83 mW at 25°C junction, which keeps the 6-DSBGA package cool enough to run without a heatsink in most board layouts. ## Reverse current protection and slew rate control Fault protection includes reverse current blocking — if the output rail stays high after the input drops, the switch prevents back-feed into the upstream supply. That matters for multi-rail systems where a downstream bulk cap holds charge longer than the input bus. The slew-rate-controlled turn-on limits inrush current during hot-plug or power sequencing, which avoids pulling the upstream regulator into current limit. The switch is non-inverting and uses a simple On/Off interface; no external Vcc/Vdd bias rail is required, so it can be driven directly from a GPIO. The 6-DSBGA package requires a controlled SMT profile and a clean PCB surface finish.","metaTitle":"TPS22925CNYPHR load switch, 9.2 mOhm, 3 A, DSBGA-6","metaDescription":"TI TPS22925CNYPHR load switch: 9.2 mOhm Rds(on), 3 A output, 0.65-3.6 V load range, reverse current protection, -40 to 105°C. Active. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Features":"Slew Rate Controlled","Interface":"On/Off","Input Type":"Non-Inverting","Output Type":"N-Channel","Switch Type":"General Purpose","Rds On (Typ)":"9.2mOhm","Mounting Type":"Surface Mount","Package / Case":"6-XFBGA, DSBGA","Product Status":"Active","Voltage - Load":"0.65V ~ 3.6V","lifecycle_stage":"eol_hot","Fault Protection":"Reverse Current","Number of Outputs":"1","Base Product Number":"TPS22925","Output Configuration":"High Side","Ratio - Input:Output":"1:1","Operating Temperature":"-40°C~105°C(TA)","Current - Output (Max)":"3A","Supplier Device Package":"6-DSBGA","Voltage - Supply (Vcc/Vdd)":"Not Required"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.6900","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/e616dfe6cd00b7faf87841e65e32b952.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TPS22925CNYPHR/alternatives.json"},"ai":{"faq":[{"question":"What is the Rds(on) of TPS22925CNYPHR?","answer":"The typical Rds(on) is 9.2 mOhm, specified at the rated load voltage and 25°C junction temperature. Actual on-resistance increases with temperature per the normalised curve in the datasheet."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TPS22925CNYPHR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TPS22925CNYPHR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}