{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TPD7S019-15RSVR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TPD7S019-15RSVR","canonicalUrl":"https://icboms.com/texas-instruments/TPD7S019-15RSVR","factsUrl":"https://icboms.com/api/mcp/products/TPD7S019-15RSVR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TPD7S019-15RSVR, Mixed Technology ESD protection array, 7 circuits, DVI-I/VGA Ports, Surface Mount, 16-UFQFN package, Active.","salesMarkdown":"## Video port protection in a 2.6x1.8 mm footprint The TPD7S019-15RSVR is a 7-circuit mixed-technology ESD protection and termination array from Texas Instruments, purpose-built for DVI-I and VGA ports. It integrates the filtering and clamping network needed on the RGB, clock, and DDC lines of a video interface, saving board area versus discrete TVS diodes and series resistors. The 16-UQFN package (2.6x1.8 mm) is a fine-pitch land-grid array that requires a solder-paste stencil matched to the 0.40 mm pad pitch. The small body makes it a fit for graphics-card edge regions where component height is constrained by the bracket or heatsink. A DVI-I single-link interface uses five data pairs (three RGB channels, one clock, one DDC) plus the +5 V sense line — seven lines total. The TPD7S019-15RSVR covers exactly that set in one IC. For a VGA port, the same seven lines map to the RGB, HSYNC, VSYNC, DDC data, and DDC clock. The mixed-technology approach combines ESD clamping with series termination, so the output impedance stays controlled without adding external resistors.","metaTitle":"TPD7S019-15RSVR DVI-I/VGA Port Protection IC, 7 Circuits","metaDescription":"Texas Instruments TPD7S019-15RSVR mixed-technology ESD protection array for DVI-I and VGA ports. 7 circuits in 16-UQFN (2.6x1.8 mm). Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Circuit Protection"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Technology":"Mixed Technology","Applications":"DVI-I, VGA Ports","Mounting Type":"Surface Mount","Package / Case":"16-UFQFN","Product Status":"Active","lifecycle_stage":"eol_hot","Number of Circuits":"7","Voltage - Clamping":"-","Base Product Number":"TPD7S019","Supplier Device Package":"16-UQFN (2.6x1.8)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.5400","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/bff2f00a0bbe6c92fbccfd18c762f9fb.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TPD7S019-15RSVR/alternatives.json"},"ai":{"faq":[{"question":"Is TPD7S019-15RSVR compatible with DVI-D interfaces?","answer":"The listed application is DVI-I and VGA ports. DVI-D uses a subset of the DVI-I pinout (no analog RGB lines), so the TPD7S019-15RSVR can still be used on the digital-only lines, but the analog channels would be unused. For a pure DVI-D design, a smaller array may suffice."},{"question":"What is the difference between TPD7S019 and TPD7S019A?","answer":"The evidence does not carry a specification for the TPD7S019A variant. The TPD7S019-15RSVR is the -15 suffix version in the TPD7S019 base family. For a direct parametric comparison, refer to the manufacturer's datasheet."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TPD7S019-15RSVR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TPD7S019-15RSVR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}