{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TMS320F28062PFPQR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TMS320F28062PFPQR","canonicalUrl":"https://icboms.com/texas-instruments/TMS320F28062PFPQR","factsUrl":"https://icboms.com/api/mcp/products/TMS320F28062PFPQR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments C2000 C28x Piccolo series, TMS320F28062PFPQR, 32-bit single-core MCU, 90MHz, 128KB (64K x 16) FLASH, 26K x 16 RAM, CAN/I²C/SPI/UART, 40 I/O, -40°C to 125°C, 80-TQFP Exposed Pad, Tape & Reel.","salesMarkdown":"## C28x Piccolo for automotive and industrial motor control The part carries AEC-Q100 automotive qualification, so it is rated for under-hood and chassis-domain environments where the ambient hits 125°C. ## 90 MHz and the PWM update rate At 90 MHz the C28x core can close a current-control loop at 50 kHz or higher without breaking a sweat. The on-chip PWM peripheral (part of the ePWM module) runs from the same clock, so you get high-resolution edge placement for three-phase motor drives and switched-mode power supplies. The 12-bit ADC banks (12 channels total) sample synchronously with the PWM, which is the standard pattern for field-oriented control. ## Automotive-grade silicon, not just commercial The AEC-Q100 stamp means this part went through the full automotive qualification flow: extended temperature cycling, high-temperature operating life, and latch-up testing. ## Peripheral mix for CAN-based networks This MCU includes a CANbus controller, multiple SPI and SCI (UART) ports, plus I²C and McBSP. The CAN node is essential for automotive body and powertrain networks. The 40 general-purpose I/O pins are enough to interface with external sensors, gate drivers, and position encoders without an I/O expander. ## Package and thermal: the exposed pad matters Without it, the junction temperature climbs fast above 400 mA continuous I/O current or when the core runs full-tilt at 125°C ambient. The base product number is TMS320, and the family includes several Flash and RAM density variants that share the same pinout.","metaTitle":"TMS320F28062PFPQR C2000 Piccolo MCU, 90MHz, AEC-Q100","metaDescription":"Texas Instruments TMS320F28062PFPQR 32-bit C28x MCU, 90MHz, 128KB Flash, 26Kx16 RAM, AEC-Q100 automotive qualified, -40 to 125°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Microcontrollers & Processors (MCU / MPU / DSP)"],"specifications":{"Mfr":"Texas Instruments","Speed":"90MHz","Series":"Automotive, AEC-Q100, C2000™ C28x Piccolo™","Package":"Tape & Reel (TR)","RAM Size":"26K x 16","Core Size":"32-Bit Single-Core","EEPROM Size":"-","Peripherals":"Brown-out Detect/Reset, DMA, POR, PWM, WDT","Connectivity":"CANbus, I²C, McBSP, SCI, SPI, UART/USART","Mounting Type":"Surface Mount","Number of I/O":"40","Core Processor":"C28x","Package / Case":"80-TQFP Exposed Pad","Product Status":"Active","Data Converters":"A/D 12x12b","Oscillator Type":"Internal","lifecycle_stage":"eol_hot","Base Product Number":"TMS320","Program Memory Size":"128KB (64K x 16)","Program Memory Type":"FLASH","Operating Temperature":"-40°C~125°C(TA)","Supplier Device Package":"80-HTQFP (12x12)","Voltage - Supply (Vcc/Vdd)":"1.71V ~ 1.995V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$11.7849","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/8f4cdc97cce6199b7fb1beb45678062d.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TMS320F28062PFPQR/alternatives.json"},"ai":{"faq":[{"question":"Is TMS320F28062PFPQR suitable for automotive motor control?","answer":"Yes. The 90 MHz C28x core and 12-channel 12-bit ADC make it a standard choice for field-oriented control of permanent-magnet and induction motors in automotive traction, steering, and pump applications."},{"question":"What is the difference between TMS320F28062PFPQR and TMS320F28060?","answer":"Both are C28x Piccolo MCUs in the same 80-HTQFP package and share the same pinout. The F28062 carries 128 KB Flash and 26K x 16 RAM, while the F28060 has 64 KB Flash and 20K x 16 RAM. The F28062 also includes the CAN module, which the F28060 lacks. For motor-control applications needing CAN networking, the F28062 is the correct choice."},{"question":"How to program TMS320F28062PFPQR?","answer":"The device is programmed via the JTAG or serial-wire debug interface using TI's Code Composer Studio IDE or third-party tools like IAR Embedded Workbench. The on-chip Flash is programmed through the boot ROM, which supports boot from SCI, SPI, I²C, CAN, and parallel I/O. The internal oscillator means no external crystal is required for basic operation, though an external clock can be used for tighter timing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TMS320F28062PFPQR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TMS320F28062PFPQR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}