{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV9301IDCKR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV9301IDCKR","canonicalUrl":"https://icboms.com/texas-instruments/TLV9301IDCKR","factsUrl":"https://icboms.com/api/mcp/products/TLV9301IDCKR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV9301IDCKR general-purpose op-amp, 1 MHz gain-bandwidth, 3V/µs slew rate, rail-to-rail output, SC-70-5 package, single channel, 150 µA supply.","salesMarkdown":"## 1 MHz gain-bandwidth for sensor conditioning in tight spaces Texas Instruments TLV9301IDCKR is a single-channel general-purpose op-amp with 1 MHz gain-bandwidth product and 3 V/µs slew rate, packaged in a 5-pin SC-70-5 (SOT-353) footprint. The 1 MHz GBW means the usable closed-loop bandwidth at a gain of 10 is about 100 kHz — adequate for thermocouple conditioning, pressure sensor amplification, or audio-frequency signal chains where the signal content stays below 20 kHz. Rail-to-rail output swing lets the amplifier use the full supply range without headroom loss, which matters when the ADC reference is the same rail. ## Wide supply span and low quiescent current simplify rail design Supply span from 4.5 V to 40 V means the TLV9301IDCKR runs directly off a single 5 V logic rail, a 12 V industrial bus, or a 24 V field supply — no intermediate regulator needed for the op-amp itself. Quiescent current is 150 µA per channel, low enough for battery-powered sensor nodes that spend most of their life in a low-power sleep mode with periodic wake-ups for measurement. Input bias current of 10 pA keeps the DC error negligible when the source impedance is in the tens of kOhm range — a 10 kΩ source adds only 0.1 µV of offset from bias current. ## Industrial temperature grade and active lifecycle Rated for -40 °C to 125 °C ambient — the full industrial temperature band covers outdoor telecom cabinets, engine-bay electronics, and factory-floor enclosures without derating. The SC-70-5 package (SOT-353) is a standard small-outline footprint shared across many TI op-amp families, so PCB layout reuse across different gain-bandwidth options is straightforward.","metaTitle":"Texas Instruments TLV9301IDCKR op-amp, 1 MHz, SC-70-5","metaDescription":"Texas Instruments TLV9301IDCKR general-purpose op-amp, 1 MHz GBW, 3V/µs slew rate, rail-to-rail output, SC-70-5 package. Active, ROHS3 compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"3V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"5-TSSOP, SC-70-5, SOT-353","lifecycle_stage":"eol_hot","Current - Supply":"150µA","Number of Circuits":"1","Current - Input Bias":"10 pA","Operating Temperature":"-40°C ~ 125°C (TA)","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"500 µV","Supplier Device Package":"SC-70-5","Current - Output / Channel":"60 mA","Voltage - Supply Span (Max)":"40 V","Voltage - Supply Span (Min)":"4.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.57","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$0.57000","currency":"USD"},{"qty":10,"price":"$0.50000","currency":"USD"},{"qty":25,"price":"$0.46960","currency":"USD"},{"qty":100,"price":"$0.38330","currency":"USD"},{"qty":250,"price":"$0.35604","currency":"USD"},{"qty":500,"price":"$0.30300","currency":"USD"},{"qty":1000,"price":"$0.24240","currency":"USD"},{"qty":3000,"price":"$0.21967","currency":"USD"},{"qty":6000,"price":"$0.20453","currency":"USD"},{"qty":15000,"price":"$0.19695","currency":"USD"},{"qty":30000,"price":"$0.18938","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/22b150f316d9e37aa514779fbd81c27a.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is TLV9301IDCKR's listed slew rate?","answer":"The TLV9301IDCKR has a slew rate of 3 V/µs. At this rate, a full 10 V output swing settles in about 3.3 µs, which is adequate for audio-frequency signals and most sensor conditioning applications."},{"question":"Will TLV9301IDCKR drop into a board designed for LM6152ACMX/NOPB?","answer":"No — the LM6152ACMX/NOPB is a dual-channel op-amp in a different package, while the TLV9301IDCKR is single-channel in SC-70-5. They are not pin-compatible. The LM6152 also has a narrower 0 °C to 70 °C temperature range versus the TLV9301's -40 °C to 125 °C range."},{"question":"What compliance documentation does Texas Instruments provide for TLV9301IDCKR?","answer":"Texas Instruments certifies the TLV9301IDCKR as ROHS3 Compliant. Standard documentation includes the datasheet, RoHS declaration, and REACH compliance information available through TI's documentation portal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV9301IDCKR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV9301IDCKR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}