{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV9004IRTER","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV9004IRTER","canonicalUrl":"https://icboms.com/texas-instruments/TLV9004IRTER","factsUrl":"https://icboms.com/api/mcp/products/TLV9004IRTER","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV9004IRTER, quad general-purpose op-amp, 1 MHz gain-bandwidth, 2 V/µs slew rate, rail-to-rail output, 60 µA supply per channel, 1.8 V to 5.5 V supply, -40°C to 125°C, 16-WQFN (3x3 mm).","salesMarkdown":"Its 1 MHz gain-bandwidth product and 2 V/µs slew rate suit it for low-frequency signal conditioning — sensor buffering, filter stages, and level translation — where the signal bandwidth stays below a few hundred kilohertz. Each of the four amplifiers draws 60 µA of supply current, making the total quiescent draw 240 µA for the package. At 1.8 V minimum supply, this part runs directly from a single Li-ion cell through its discharge curve, which is the primary reason to select it over higher-speed quads that burn ten times the current. The 40 mA output current per channel is enough to drive an ADC input, a small relay coil, or a LED indicator directly, but not a heavy load like a motor or solenoid — those need a buffer transistor. Input bias current is 5 pA typical, so the part can interface with high-impedance sensors (piezoelectric, photodiode) without significant offset from bias current flowing through source resistance. The 400 µV input offset voltage is typical for a general-purpose CMOS op-amp; for precision DC measurements below 1 mV, a zero-drift amplifier would be the better choice. ## Package and thermal — 16-WQFN with exposed pad Without that via stitch, the junction temperature rises quickly when all four channels source 40 mA simultaneously. The pad also provides a low-inductance ground return, which helps keep the supply clean in mixed-signal layouts. ## Lifecycle and sourcing posture It is a current-production part from Texas Instruments, so no last-time-buy risk is on the horizon. For dual-sourcing, the TLV9351IDCKR is a single-channel alternative with higher bandwidth (3.5 MHz) and faster slew rate (20 V/µs), but it is not a pin-compatible drop-in — the package and channel count differ. The TLV9362IDDFR is a dual-channel sibling with 10.6 MHz GBW. Neither is a direct quad replacement; the TLV9004IRTER is the only quad in this low-power family at the 1 MHz tier.","metaTitle":"TI TLV9004IRTER quad op-amp, 1 MHz GBW, 60 µA/ch, 16-WQFN","metaDescription":"Texas Instruments TLV9004IRTER quad general-purpose op-amp: 1 MHz GBW, 2 V/µs slew rate, rail-to-rail output, 60 µA supply per channel, 1.8 V to 5.5 V supply","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"2V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"16-WFQFN Exposed Pad","lifecycle_stage":"eol_hot","Current - Supply":"60µA","Number of Circuits":"4","Current - Input Bias":"5 pA","Operating Temperature":"-40°C ~ 125°C (TA)","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"400 µV","Supplier Device Package":"16-WQFN (3x3)","Current - Output / Channel":"40 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"1.8 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.26","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$1.26000","currency":"USD"},{"qty":10,"price":"$1.12300","currency":"USD"},{"qty":25,"price":"$1.06560","currency":"USD"},{"qty":100,"price":"$0.87520","currency":"USD"},{"qty":250,"price":"$0.81816","currency":"USD"},{"qty":500,"price":"$0.72302","currency":"USD"},{"qty":1000,"price":"$0.57081","currency":"USD"},{"qty":3000,"price":"$0.53850","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/b8c4d1aa0622805c3f390c45b6b85e5b.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the typical application for the TLV9004IRTER?","answer":"The TLV9004IRTER is a quad general-purpose op-amp suited for multi-channel sensor conditioning, active filters, level shifting, and ADC driver stages in battery-powered or industrial equipment."},{"question":"Does the TLV9004IRTER support rail-to-rail output?","answer":"Yes, the output stage is rail-to-rail, meaning the output voltage can swing within a few millivolts of both supply rails. This preserves dynamic range in low-voltage single-supply designs, such as 3.3 V or 1.8 V systems, where a conventional output stage would lose headroom."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV9004IRTER","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV9004IRTER when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}