{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV9002IDSGR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV9002IDSGR","canonicalUrl":"https://icboms.com/texas-instruments/TLV9002IDSGR","factsUrl":"https://icboms.com/api/mcp/products/TLV9002IDSGR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV9002IDSGR dual general-purpose op-amp, 1 MHz gain-bandwidth, 60 µA supply per channel, rail-to-rail output, 1.8 V to 5.5 V supply, -40°C to 125°C, 8-WSON (2x2) package.","salesMarkdown":"## 60 µA supply per channel — the power budget anchor The TLV9002IDSGR is a dual general-purpose op-amp from Texas Instruments. Its defining characteristic for BOM planning is the 60 µA supply current per channel — this sets the power floor for multi-channel sensor interfaces, battery monitors, or any design where the op-amp bank must not dominate the system current budget. The 1 MHz gain-bandwidth product covers audio-band filtering, slow ADC drivers, and DC-level shifting without excess loop gain. ## Rail-to-rail output and 1.8 V operation The 5.5 V maximum covers 5 V sensor supplies and legacy industrial buses. ## 2V/µs slew rate and 5 pA input bias The 2V/µs slew rate supports signal swings up to about 300 kHz at full output — adequate for audio, control loops, and most sensor conditioning. The 5 pA input bias current suits high-impedance sources like photodiodes or pH probes where bias-induced offset would otherwise dominate the error budget. Input offset voltage is 400 µV, typical for a general-purpose CMOS stage. ## 8-WSON package and layout note The 8-WSON package with exposed pad — supplier device package 8-WSON (2x2) — measures 2 mm × 2 mm. Surface-mount only.","metaTitle":"TI TLV9002IDSGR dual op-amp, 1 MHz GBW, 60 µA supply","metaDescription":"Texas Instruments TLV9002IDSGR dual general-purpose op-amp. 1 MHz gain-bandwidth, 60 µA supply per channel, rail-to-rail output, 1.8-5.5 V supply.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"2V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-WFDFN Exposed Pad","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"60µA","Number of Circuits":"2","Base Product Number":"TLV9002","Current - Input Bias":"5 pA","Operating Temperature":"-40°C~125°C(TA)","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"400 µV","Supplier Device Package":"8-WSON (2x2)","Current - Output / Channel":"40 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"1.8 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.8300","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TLV9002IDSGR/alternatives.json"},"ai":{"faq":[{"question":"Is TLV9002IDSGR obsolete or end-of-life?","answer":"No. TLV9002IDSGR carries an active product status."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV9002IDSGR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV9002IDSGR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}