{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV70725PDQNT","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV70725PDQNT","canonicalUrl":"https://icboms.com/texas-instruments/TLV70725PDQNT","factsUrl":"https://icboms.com/api/mcp/products/TLV70725PDQNT","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV70725PDQNT LDO regulator, fixed 2.5V output, 200mA, 50µA quiescent current, PSRR 70dB~50dB (100Hz~1MHz), 4-XDFN exposed pad, surface mount.","salesMarkdown":"## Fixed 2.5V rail from a 1×1 mm package The TLV70725PDQNT: The 50 µA quiescent current is the current the regulator itself burns to stay alive — in a battery-powered sensor that spends most of its time in a light-load state, that Iq is the floor the system sees when the load is sleeping. The dropout voltage is 0.3 V max at 150 mA, which means the input rail needs to stay above 2.8 V to keep the output in regulation at that load. Below that headroom the output starts to track the input minus the dropout — the pass transistor enters its linear region and PSRR collapses. ## PSRR profile — where the noise rejection lives The PSRR is specified as 70 dB at 100 Hz, rolling off to 50 dB at 1 MHz. That 70 dB at line frequency means a 100 mV ripple on the input is attenuated to about 32 µV at the output — relevant for powering analog front-ends or ADC reference rails where the 50/60 Hz mains hum couples through the upstream supply. The 50 dB at 1 MHz is the band where switching regulators typically emit their fundamental ripple; the attenuation at that frequency is about 316×, so a 10 mV switching ripple becomes roughly 32 µV at the output. The protection set includes over-current, over-temperature, short-circuit, and reverse polarity — the reverse-polarity clamp means the regulator survives a reversed input without the output capacitor discharging back through the pass element. The enable pin (active high) lets a GPIO or supervisor IC shut the rail down, pulling Iq to near zero when the load is not needed. ## Package and board-fit for the 4-X2SON The junction-to-ambient thermal resistance depends on the board copper area; a 1×1 mm pad with a single via to an inner ground plane typically gives about 200 °C/W, so at 200 mA with a 1 V dropout (200 mW dissipation) the junction rise is about 40 °C above ambient.","metaTitle":"Texas Instruments TLV70725PDQNT LDO, 2.5V Fixed, 200mA","metaDescription":"Texas Instruments TLV70725PDQNT LDO regulator, 2.5V fixed output, 200mA, 50µA Iq, PSRR 70dB~50dB (100Hz~1MHz), 4-X2SON package. Active, ROHS3. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"PSRR":"70dB ~ 50dB (100Hz ~ 1MHz)","Package":"Tape & Reel (TR); Cut Tape (CT)","Output Type":"Fixed","Mounting Type":"Surface Mount","Package / Case":"4-XDFN Exposed Pad","lifecycle_stage":"eol_hot","Control Features":"Enable","Current - Output":"200mA","Protection Features":"Over Current, Over Temperature, Short Circuit, Reverse Polarity","Number of Regulators":"1","Output Configuration":"Positive","Operating Temperature":"-40°C ~ 125°C (TJ)","Voltage - Input (Max)":"5.5V","Voltage Dropout (Max)":"0.3V @ 150mA","Supplier Device Package":"4-X2SON (1x1)","Current - Quiescent (Iq)":"50 µA","Voltage - Output (Min/Fixed)":"2.5V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.95","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$0.95000","currency":"USD"},{"qty":10,"price":"$0.85400","currency":"USD"},{"qty":25,"price":"$0.81040","currency":"USD"},{"qty":100,"price":"$0.66560","currency":"USD"},{"qty":250,"price":"$0.62216","currency":"USD"},{"qty":500,"price":"$0.54982","currency":"USD"},{"qty":1250,"price":"$0.43407","currency":"USD"},{"qty":2500,"price":"$0.40950","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/07bf6cd0aa61abddb98d23118d0d9950.pdf","sourceUrl":null},"ai":{"faq":[{"question":"How can I order TLV70725PDQNT and get a quote?","answer":"The TLV70725PDQNT is sourced through authorized distribution."},{"question":"What is the PSRR of TLV70725PDQNT at 100 Hz and 1 MHz?","answer":"The PSRR is 70 dB at 100 Hz and 50 dB at 1 MHz. This means a 100 mV input ripple at 100 Hz is attenuated to about 32 µV at the output; at 1 MHz the attenuation is about 316×."},{"question":"What compliance documentation does Texas Instruments provide for TLV70725PDQNT?","answer":"Texas Instruments certifies the TLV70725PDQNT as ROHS3 Compliant. No additional UL or IEC certification is listed in the product record."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV70725PDQNT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV70725PDQNT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}