{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV4112CDGN","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV4112CDGN","canonicalUrl":"https://icboms.com/texas-instruments/TLV4112CDGN","factsUrl":"https://icboms.com/api/mcp/products/TLV4112CDGN","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV4112CDGN, dual general-purpose op-amp, 2.7 MHz gain bandwidth, 1.57 V/µs slew rate, rail-to-rail output, 2.5 V to 6 V supply, 320 mA output per channel, 8-HVSSOP exposed-pad package, 0°C to 70°C.","salesMarkdown":"That is roughly ten times what a typical rail-to-rail op-amp delivers, so this part is chosen when the load is low-impedance — think headphone drivers, cable buffers, or actuator pre-drive stages where the op-amp directly sources or sinks significant current without a separate buffer transistor. Gain bandwidth is 2.7 MHz with a 1.57 V/µs slew rate; that is modest by modern standards, but adequate for audio-band or slow-control loops where the high output current is the primary spec. ## Supply budget and thermal design Quiescent supply current is 700 µA for both channels combined. That is the trade-off: you get 320 mA output capability while the amp itself draws under a milliamp, so efficiency is high when the output is lightly loaded or idle. But at full output into a low-impedance load, the package dissipation climbs quickly. The 8-HVSSOP with exposed pad is designed to shed heat into a PCB copper land — the datasheet layout recommendation for that thermal pad is not optional.","metaTitle":"TLV4112CDGN General Purpose Op-Amp, 2.7 MHz","metaDescription":"TI TLV4112CDGN dual op-amp: 2.7 MHz GBW, 1.57 V/µs slew rate, 320 mA output, rail-to-rail, 2.5-6 V supply, 8-HVSSOP. Active, ROHS3. Order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tube","Slew Rate":"1.57V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-TSSOP, 8-MSOP (0.118\\\", 3.00mm Width) Exposed Pad","lifecycle_stage":"eol_hot","Current - Supply":"700µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"0.3 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"2.7 MHz","Voltage - Input Offset":"175 µV","Supplier Device Package":"8-HVSSOP","Current - Output / Channel":"320 mA","Voltage - Supply Span (Max)":"6 V","Voltage - Supply Span (Min)":"2.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.11","priceTiers":[{"qty":1,"price":"$3.11000","currency":"USD"},{"qty":10,"price":"$2.79800","currency":"USD"},{"qty":25,"price":"$2.63920","currency":"USD"},{"qty":100,"price":"$2.24880","currency":"USD"},{"qty":250,"price":"$2.11152","currency":"USD"},{"qty":500,"price":"$1.84758","currency":"USD"},{"qty":1000,"price":"$1.53085","currency":"USD"},{"qty":2500,"price":"$1.49400","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/5d78b94d1c78b736768ca50813a3c554.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TLV4112CDGN/alternatives.json"},"ai":{"faq":[{"question":"Is TLV4112CDGN obsolete or active?","answer":"Active. Texas Instruments lists the product status as Active and ROHS3 compliant. No discontinuation notice is in effect."},{"question":"How much output current can TLV4112CDGN drive?","answer":"320 mA per channel. This is the headline rating that distinguishes it from general-purpose op-amps; suitable for directly driving low-impedance loads like headphones or solenoids."},{"question":"What package does TLV4112CDGN use?","answer":"8-TSSOP / 8-MSOP (0.118\", 3.00 mm width) with exposed pad, also designated as 8-HVSSOP. The exposed pad must be soldered to a PCB thermal land for heat dissipation."},{"question":"What are the equivalents or replacements for TLV4112CDGN?","answer":"No direct pin-compatible second source is listed. The TLV9351IDCKR is a single-channel alternative with higher bandwidth (3.5 MHz) and wider temperature range (-40°C to 125°C) but lower output current (60 mA). For a dual-channel replacement with similar output drive, evaluate the TLV9362IDDFR (10.6 MHz, 25 V/µs, 60 mA output). Neither is a drop-in — each requires layout and supply review."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV4112CDGN","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV4112CDGN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}