{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV3541IDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV3541IDR","canonicalUrl":"https://icboms.com/texas-instruments/TLV3541IDR","factsUrl":"https://icboms.com/api/mcp/products/TLV3541IDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV3541IDR general-purpose op-amp, single-channel, 100 MHz GBP, 200 MHz -3dB bandwidth, 150 V/µs slew rate, rail-to-rail output, 8-SOIC package.","salesMarkdown":"## 200 MHz bandwidth, 150 V/µs — what the speed ratings mean for signal chain fit The TLV3541IDR is a single-channel general-purpose operational amplifier from Texas Instruments, delivering a 200 MHz -3dB bandwidth and a 100 MHz gain-bandwidth product. These figures set the usable small-signal frequency range — the 200 MHz -3dB point means the amplifier's open-loop gain drops by 3 dB at that frequency, so closed-loop gain accuracy degrades as the signal approaches that ceiling. For a gain-of-10 stage, the effective bandwidth drops to roughly 20 MHz (GBP / closed-loop gain), which is the practical limit for linear amplification. The 150 V/µs slew rate governs the large-signal response — the maximum rate the output voltage can change. For a 2 V peak-to-peak output swing, the full-power bandwidth (the highest frequency the amplifier can reproduce without slew-rate distortion) is about 12 MHz. Signals above that frequency will see the output edge rate limited by the slew rate, introducing non-linear distortion. This matters for pulse amplifiers, ADC drivers, or video buffers where the signal's rise time must stay within the amplifier's slewing capability. ## Rail-to-rail output and 2.5 V to 5.5 V supply — single-supply flexibility The rail-to-rail output stage swings within millivolts of both supply rails, so the usable dynamic range extends nearly to the supply limits. With a minimum supply span of 2.5 V and a maximum of 5.5 V, the TLV3541IDR runs from a single 3.3 V or 5 V rail — common in battery-powered or low-voltage systems — without needing a negative supply. The 5.2 mA typical supply current is moderate for this speed class; a 200 MHz amplifier drawing under 6 mA is a reasonable trade-off for portable or multi-channel designs where per-channel power budget is tight. Input bias current is 3 pA typical, and input offset voltage is 2 mV typical. The 3 pA bias is low enough that it does not cause significant voltage error across source impedances up to several hundred kilo-ohms — useful for photodiode or high-impedance sensor front-ends. The 2 mV offset is standard for a general-purpose amplifier; if sub-millivolt precision is needed, a zero-drift or precision amplifier family would be the better fit. ## 8-SOIC package, -40°C to 125°C — board integration and environmental range Housed in an 8-SOIC package (3.90 mm width, 0.154\" body), the TLV3541IDR uses the standard SOIC-8 footprint — a common land pattern that is easy to route on two-layer boards. The supplier device package is 8-SOIC, meaning the same mechanical outline as the package/case. The operating temperature range spans -40°C to 125°C, covering industrial and automotive under-hood environments. This temperature grade, combined with the active lifecycle status, makes the part suitable for designs that need to survive thermal cycling in engine bays, factory floors, or outdoor enclosures. Available in Tape & Reel (TR) or Cut Tape (CT) packaging options. The reel format is standard for automated pick-and-place assembly; cut tape suits prototype or low-volume builds. RoHS3 compliant per the lifecycle record, with no exemptions that complicate EU or California market entry.","metaTitle":"TLV3541IDR Texas Instruments Op-Amp, 200 MHz, 150 V/µs","metaDescription":"Texas Instruments TLV3541IDR general-purpose op-amp: 200 MHz -3dB bandwidth, 150 V/µs slew rate, rail-to-rail output. Active, RoHS3. 8-SOIC. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"150V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","-3db Bandwidth":"200 MHz","Amplifier Type":"General Purpose","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"5.2mA","Number of Circuits":"1","Current - Input Bias":"3 pA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"100 MHz","Voltage - Input Offset":"2 mV","Supplier Device Package":"8-SOIC","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"2.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.74","priceTiers":[{"qty":1,"price":"$1.74000","currency":"USD"},{"qty":10,"price":"$1.55100","currency":"USD"},{"qty":25,"price":"$1.47200","currency":"USD"},{"qty":100,"price":"$1.20920","currency":"USD"},{"qty":250,"price":"$1.13040","currency":"USD"},{"qty":500,"price":"$0.99894","currency":"USD"},{"qty":1000,"price":"$0.78864","currency":"USD"},{"qty":2500,"price":"$0.74400","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/c2ed41ea5af6ddcacf50cd9dc7005231.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TLV3541IDR/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV3541IDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV3541IDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}