{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV2785CDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV2785CDR","canonicalUrl":"https://icboms.com/texas-instruments/TLV2785CDR","factsUrl":"https://icboms.com/api/mcp/products/TLV2785CDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV2785CDR, General Purpose Amplifier, 4 Circuit, Rail-to-Rail, 5V/µs, 8 MHz, 1.8V to 3.6V, 16-SOIC, 0°C to 70°C.","salesMarkdown":"## Quad op-amp for low-voltage, low-power signal chains It delivers an 8 MHz gain-bandwidth product with a 5 V/µs slew rate, drawing 650 µA total supply current across all four channels. The rail-to-rail output stage swings within millivolts of each supply rail, useful when the ADC reference or downstream load runs on the same 3.3 V or 1.8 V rail. Input bias current is 2.5 pA typical, and input offset voltage is 250 µV max — adequate for sensor conditioning where the signal is in the tens-of-millivolts range. The 23 mA per-channel output current can drive a modest headphone or a reference buffer. ## Commercial temperature grade limits deployment It is not rated for automotive under-hood, outdoor telecom cabinets, or factory-floor environments where ambient can exceed 70°C. ## Package and supply considerations The 1.8 V minimum supply means it can run directly from a single Li-ion cell or two alkaline cells without a boost regulator. The 3.6 V maximum supply span limits its use to 3.3 V or lower rails — do not connect to a 5 V supply. The rail-to-rail output is on all four channels, but the input common-mode range is not rail-to-rail; the datasheet should be consulted for the exact input voltage limits near the positive rail.","metaTitle":"TLV2785CDR quad op-amp, 8 MHz GBW, 5 V/µs slew, 1.8-3.6 V","metaDescription":"Texas Instruments TLV2785CDR general-purpose quad op-amp in 16-SOIC. 8 MHz GBW, 5 V/µs slew rate, rail-to-rail output, 650 µA supply, 1.8-3.6 V.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Bulk","Slew Rate":"5V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"16-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"650µA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"2.5 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"8 MHz","Voltage - Input Offset":"250 µV","Supplier Device Package":"16-SOIC","Current - Output / Channel":"23 mA","Voltage - Supply Span (Max)":"3.6 V","Voltage - Supply Span (Min)":"1.8 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.87","stockQuantity":0,"priceTiers":[{"qty":344,"price":"$0.87000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/17418d1819e154ec16f4181d2ea83363.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the equivalent for TLV2785CDR?","answer":"Neither is a direct pin-compatible drop-in; verify the BOM requirements before substituting."},{"question":"Is TLV2785CDR compatible with 3.3V systems?","answer":"Yes. The rail-to-rail output swings within millivolts of the 3.3 V rail, and the 5 V/µs slew rate with 8 MHz GBW is sufficient for most 3.3 V sensor and audio signal chains."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV2785CDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV2785CDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}