{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV2785AIPW","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV2785AIPW","canonicalUrl":"https://icboms.com/texas-instruments/TLV2785AIPW","factsUrl":"https://icboms.com/api/mcp/products/TLV2785AIPW","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV2785AIPW, quad general-purpose op-amp, 8 MHz gain bandwidth, 5 V/µs slew rate, rail-to-rail output, 1.8 V to 3.6 V supply, 16-TSSOP package, -40°C to 125°C operating temperature.","salesMarkdown":"## Four amplifiers, one small package Rail-to-rail output swings let it drive ADC inputs or moderate loads without losing headroom. ## What the 650 µA supply current buys you The whole quad draws 650 µA typical — about 162.5 µA per amplifier. That is low enough to leave headroom for the rest of the signal chain in a battery-powered sensor module or a multi-channel data-acquisition front end. Input bias current sits at 2.5 pA, so you can use high-impedance sources like pH probes or photodiode transimpedance stages without loading them down. Input offset is trimmed to 250 µV max, which is adequate for 12-bit systems but worth budgeting for if you are stacking gain. ## RoHS flag — check your assembly line That means the device itself may contain lead or other restricted substances, so verify your soldering process and end-market regulatory requirements before committing the BOM. If your board must meet RoHS, you will need to look at a lead-free alternate or accept the exemption paperwork. ## Sourcing and fit for the BOM Because it is still active, there is no last-time-buy pressure. The 16-TSSOP footprint is common and hand-solderable with a fine tip, so field-swap is feasible if you have the right iron. The Bulk shipping medium means the parts come loose in a bag — not on a reel — so factor in manual handling if your pick-and-place line expects tape.","metaTitle":"TLV2785AIPW Quad Op-Amp, 8 MHz, Rail-to-Rail, 16-TSSOP","metaDescription":"Texas Instruments TLV2785AIPW quad general-purpose op-amp: 8 MHz GBW, 5 V/µs slew rate, rail-to-rail output, 1.8 V–3.6 V supply, -40°C to 125°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Bulk","Slew Rate":"5V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"16-TSSOP (0.173\\\", 4.40mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"650µA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"2.5 pA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"8 MHz","Voltage - Input Offset":"250 µV","Supplier Device Package":"16-TSSOP","Current - Output / Channel":"23 mA","Voltage - Supply Span (Max)":"3.6 V","Voltage - Supply Span (Min)":"1.8 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.94","stockQuantity":0,"priceTiers":[{"qty":321,"price":"$0.94000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/5c4ff94d70da31752d4cfc95eb15c28f.pdf","sourceUrl":null},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV2785AIPW","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV2785AIPW when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}