{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV2770IDGK","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV2770IDGK","canonicalUrl":"https://icboms.com/texas-instruments/TLV2770IDGK","factsUrl":"https://icboms.com/api/mcp/products/TLV2770IDGK","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV2770IDGK, single CMOS op-amp, AEC-Q100 automotive grade, 5.1 MHz gain bandwidth, 10.5 V/µs slew rate, rail-to-rail output, 2.5 V to 5.5 V supply, 1 mA supply current, 8-VSSOP package.","salesMarkdown":"## Automotive-grade CMOS op-amp for sensor conditioning and actuator drive The CMOS input stage draws only 1 mA quiescent supply current and presents 2 pA input bias current, making it suitable for high-impedance sensor interfaces in engine control units, transmission modules, and body electronics. With a 5.1 MHz gain-bandwidth product and 10.5 V/µs slew rate, this op-amp can handle moderate-speed sensor signals up to several hundred kilohertz without significant distortion. The 50 mA output current capability allows direct drive of small inductive loads such as relays or solenoids in automotive actuator circuits. ## Supply voltage and quiescent current — power budget fit The 1 mA typical supply current is low enough for always-on sensor modules in battery-backed systems, yet the output can deliver 50 mA when needed. This combination suits designs where a single op-amp must both condition a sensor signal and drive a downstream load without a separate buffer. ## Package and footprint — 8-VSSOP (3.00 mm width) Housed in an 8-VSSOP package (also described as 8-TSSOP or 8-MSOP with 0.118-inch, 3.00 mm body width), the TLV2770IDGK occupies minimal board area. The surface-mount footprint is compatible with standard reflow processes. The supplier device package is 8-VSSOP, which is the same mechanical outline as the 8-MSOP. No special thermal management is required at the 1 mA quiescent current level. ## Lifecycle and compliance — active, RoHS non-compliant However, it is listed as RoHS non-compliant. This is a sourcing constraint for designs that must meet EU RoHS or similar regulations. For RoHS-compliant requirements, verify whether an exemption applies or evaluate a lead-free alternative such as the TLV2770IDGKR (if available). The AEC-Q100 qualification is retained across the family. ## Sourcing and availability — quoted to order Given the active lifecycle status, there is no imminent supply risk for production builds. For dual-sourcing or second-source evaluation, the TLV9351IDCKR is a functionally similar single CMOS op-amp with a 3.5 MHz GBW and 20 V/µs slew rate, but it is not a direct pin-for-pin replacement — verify the pinout and package compatibility before substituting.","metaTitle":"TLV2770IDGK CMOS Op-Amp, AEC-Q100, 5.1 MHz, 10.5 V/µs","metaDescription":"Texas Instruments TLV2770IDGK single CMOS op-amp, AEC-Q100 qualified, 5.1 MHz GBW, 10.5 V/µs slew rate, rail-to-rail output, 2.5 V to 5.5 V supply.","metaKeywords":null},"attributes":{"series":"Automotive, AEC-Q100","packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"Automotive, AEC-Q100","Package":"Bulk","Slew Rate":"10.5V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"CMOS","Package / Case":"8-TSSOP, 8-MSOP (0.118\\\", 3.00mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1mA","Number of Circuits":"1","Current - Input Bias":"2 pA","Operating Temperature":"-40°C ~ 125°C (TA)","Gain Bandwidth Product":"5.1 MHz","Voltage - Input Offset":"500 µV","Supplier Device Package":"8-VSSOP","Current - Output / Channel":"50 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"2.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.0","stockQuantity":0,"priceTiers":[{"qty":301,"price":"$1.00000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/4a680df1fd2f897757f448e35df5eb73.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Where can I buy TLV2770IDGK?","answer":"The TLV2770IDGK is available to order through independent distribution. Submit an RFQ for current availability and pricing. Stock levels and lead times are confirmed at quote time."},{"question":"What is the difference between TLV2770IDGK and TLV2770IDR?","answer":"The TLV2770IDGK is packaged in an 8-VSSOP (3.00 mm width), while the TLV2770IDR is in an 8-SOIC package. The electrical specifications — 5.1 MHz GBW, 10.5 V/µs slew rate, 1 mA supply current, rail-to-rail output — are identical. The package difference affects footprint and board layout."},{"question":"What is the replacement for TLV2770IDGK?","answer":"No direct replacement is listed by the manufacturer."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV2770IDGK","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV2770IDGK when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}