{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV2764IN","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV2764IN","canonicalUrl":"https://icboms.com/texas-instruments/TLV2764IN","factsUrl":"https://icboms.com/api/mcp/products/TLV2764IN","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV2764IN quad general-purpose op-amp, 500 kHz gain-bandwidth, 0.23 V/µs slew rate, rail-to-rail output, 20 µA per channel supply, 14-DIP through-hole package.","salesMarkdown":"## Active production — no lifecycle risk for BOM continuity The TLV2764IN: ROHS3 compliant, so it ships into global markets without RoHS conflict. ## Low-power quad op-amp in a through-hole DIP Four general-purpose op-amp circuits in a single 14-DIP (0.300\", 7.62 mm) package — the quad configuration saves board space and per-channel power compared to using four separate single op-amps. Supply span runs from 1.8 V minimum to 3.6 V maximum — this single-supply range covers Li-ion battery voltage and 1.8 V / 2.5 V / 3.3 V logic rails without needing a split supply. Each channel draws 20 µA typical — the total quiescent current for the quad device is 80 µA, making it a fit for battery-powered sensor nodes or always-on analog front-ends where every microamp counts. Rail-to-rail output swings within millivolts of the supply rails, and each channel can source or sink 10.2 mA — enough to drive a low-impedance load or an ADC input without losing headroom. ## 500 kHz GBW and 0.23 V/µs slew — bandwidth budget for sensor conditioning Gain-bandwidth product is 500 kHz — for a closed-loop gain of 10, the usable signal bandwidth is about 50 kHz, which covers most slow sensor outputs (temperature, pressure, strain gauges) and audio-frequency filtering. Slew rate is 0.23 V/µs — at a 2 V peak-to-peak output swing, the full-power bandwidth is roughly 18 kHz; above that, the output waveform distorts. This matters if the op-amp drives a fast ADC input or must reproduce a pulse edge cleanly. Input bias current is 3 pA typical — low enough for high-impedance sources like photodiode transimpedance amplifiers or pH probe buffers, where bias current error would otherwise dominate the offset. Input offset voltage is 550 µV — moderate for a general-purpose CMOS op-amp; for precision DC applications below 1 mV error budget, an external trim or a zero-drift architecture would be needed. ## Industrial temperature range — -40°C to 85°C Rated for -40°C to 85°C ambient — this covers most factory-floor, outdoor telecom cabinet, and automotive cabin environments. Not rated for under-hood (125°C) or military-grade extended temperature. Through-hole 14-DIP package is breadboard-friendly and easy to hand-solder for prototyping or low-volume production, though the footprint is larger than equivalent SMD packages like TSSOP-14.","metaTitle":"Texas Instruments TLV2764IN Op-Amp, Quad 500kHz Rail-to-Rail","metaDescription":"TLV2764IN quad general-purpose op-amp, 500 kHz GBW, 0.23 V/µs slew rate, rail-to-rail output, 20 µA/ch supply. Active production, ROHS3. Order for BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tube","Slew Rate":"0.23V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"14-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"20µA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"3 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"500 kHz","Voltage - Input Offset":"550 µV","Supplier Device Package":"14-PDIP","Current - Output / Channel":"10.2 mA","Voltage - Supply Span (Max)":"3.6 V","Voltage - Supply Span (Min)":"1.8 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.02","priceTiers":[{"qty":1,"price":"$4.02000","currency":"USD"},{"qty":10,"price":"$3.61300","currency":"USD"},{"qty":25,"price":"$3.41520","currency":"USD"},{"qty":100,"price":"$2.95990","currency":"USD"},{"qty":250,"price":"$2.80816","currency":"USD"},{"qty":500,"price":"$2.51974","currency":"USD"},{"qty":1000,"price":"$2.14800","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/aacb7d9f28f0cfd29872800952f9ab76.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TLV2764IN/alternatives.json"},"ai":{"faq":[{"question":"How much power does TLV2764IN consume per channel?","answer":"Each of the four channels draws 20 µA typical, for a total quiescent current of 80 µA for the entire device — suitable for battery-powered or always-on analog circuits."},{"question":"What package does TLV2764IN come in?","answer":"The TLV2764IN is supplied in a 14-DIP (0.300\", 7.62 mm) through-hole package, shipped in tubes. The supplier device package is 14-PDIP."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV2764IN","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV2764IN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}