{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV2633IN","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV2633IN","canonicalUrl":"https://icboms.com/texas-instruments/TLV2633IN","factsUrl":"https://icboms.com/api/mcp/products/TLV2633IN","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV2633IN, dual general-purpose op-amp, 9 MHz gain bandwidth, 10 V/µs slew rate, rail-to-rail output, 2.7 V to 5.5 V supply, 14-DIP (0.300\", 7.62mm) through-hole package, -40°C to 70°C operating temperature.","salesMarkdown":"## Dual op-amp with 9 MHz GBW and rail-to-rail output This combination suits signal conditioning, active filters, and sensor interface circuits where moderate speed and single-supply operation are needed. For a 5 V peak-to-peak signal, that supports full-power bandwidth up to roughly 318 kHz before slew-rate limiting distorts the waveform. This is faster than many general-purpose op-amps (e.g., the classic LM358 at 0.3 V/µs), making the TLV2633IN a better fit for higher-speed ADC drivers, pulse amplification, or waveform generation where the edge rate matters. If the design sees sustained junction temperatures above 70°C ambient, check the derating curves or consider a wider-temperature variant. ## Through-hole DIP — prototyping and legacy boards The 14-DIP (0.300\", 7.62mm) package with through-hole mounting is breadboard-friendly and easy to hand-solder. It is the right choice for lab prototypes, educational kits, or retrofitting existing through-hole PCB layouts. For high-density or automated assembly, surface-mount alternatives in the same family (e.g., TLV2633IDR in SOIC-8) are available, but the DIP version gives the rework tech a clear advantage during debug.","metaTitle":"TLV2633IN Dual Rail-to-Rail Op-Amp, 9 MHz, 10 V/µs, 14-DIP","metaDescription":"Texas Instruments TLV2633IN dual general-purpose op-amp: 9 MHz GBW, 10 V/µs slew rate, rail-to-rail output, 2.7 V to 5.5 V supply.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tube","Slew Rate":"10V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"14-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"3.8mA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"0.7 pA","Operating Temperature":"-40°C ~ 70°C","Gain Bandwidth Product":"9 MHz","Voltage - Input Offset":"1.1 mV","Supplier Device Package":"14-PDIP","Current - Output / Channel":"28 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.71","priceTiers":[{"qty":425,"price":"$0.71000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/7c36951f478e370897e4afcf138f33c9.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TLV2633IN/alternatives.json"},"ai":{"faq":[{"question":"Is TLV2633IN rail-to-rail?","answer":"The output is rail-to-rail, meaning the output voltage can swing to within millivolts of the positive and negative supply rails. The input common-mode range is not rail-to-rail; it extends from the negative rail to within about 1.1 V of the positive rail."},{"question":"What is the closest functional equivalent to TLV2633IN?","answer":"A close functional peer is the TLV9362IDDFR, also a dual general-purpose op-amp with rail-to-rail output. The TLV2633IN remains the through-hole DIP option for designs that need that footprint."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV2633IN","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV2633IN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}