{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV2454IDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV2454IDR","canonicalUrl":"https://icboms.com/texas-instruments/TLV2454IDR","factsUrl":"https://icboms.com/api/mcp/products/TLV2454IDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV2454IDR quad general-purpose op-amp, 220 kHz gain bandwidth, 0.11 V/µs slew rate, rail-to-rail output, 23 µA supply per channel, 14-SOIC package.","salesMarkdown":"## Quad op-amp for battery-powered sensor conditioning The TLV2454IDR is a quad-channel general-purpose operational amplifier from Texas Instruments, designed for low-power signal conditioning in portable and industrial applications. With a gain-bandwidth product of 220 kHz and a slew rate of 0.11 V/µs, it handles slow-moving sensor signals — thermocouple outputs, photodiode current-to-voltage stages, or battery-monitoring dividers — where the bandwidth ceiling is below 20 kHz and the signal amplitude stays under a few volts. Each channel draws 23 µA of supply current, keeping the total quiescent draw under 100 µA for the quad package — a meaningful advantage in a 2.7 V to 6 V system where every microamp extends battery life between charges. ## Supply range, output swing, and temperature grade The rail-to-rail output stage swings within millivolts of both supply rails, preserving dynamic range when running from a 3.3 V or 5 V single supply — no negative rail needed for ground-referenced signals. Operating temperature spans -40°C to 125°C, covering industrial enclosures, automotive cabin electronics, and outdoor telecom gear where ambient heat or cold-soak is a given. Input offset voltage is 300 µV typical, and input bias current is 500 pA — adequate for DC-coupled bridge sensors or pH probes where the offset error stays within the ADC's least-significant bit budget. ## Package, footprint, and assembly Housed in a 14-SOIC package (3.90 mm body width), the TLV2454IDR mounts on the same land pattern as standard SOIC-8 but with four extra pins for the additional amplifier channels — a direct drop-in for existing quad-op-amp layouts on two-layer boards. Supplied on tape and reel (TR) or cut tape (CT) — the reel format suits high-volume pick-and-place; cut tape works for prototype runs or small-batch builds. Each channel can source or sink 10 mA, enough to drive the input of a successive-approximation ADC or a low-impedance reference buffer without an external booster stage. ## Lifecycle and compliance RoHS3 compliant — no restricted substances above the threshold; the part ships without a halogenated flame retardant or lead in the solder finish.","metaTitle":"Texas Instruments TLV2454IDR Op-Amp, 220 kHz, 14-SOIC","metaDescription":"TI TLV2454IDR quad general-purpose op-amp, 220 kHz GBW, 0.11 V/µs slew rate, rail-to-rail output, 23 µA supply, -40°C to 125°C, 14-SOIC. Active, RoHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.11V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"23µA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"500 pA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"220 kHz","Voltage - Input Offset":"300 µV","Supplier Device Package":"14-SOIC","Current - Output / Channel":"10 mA","Voltage - Supply Span (Max)":"6 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.38","priceTiers":[{"qty":1,"price":"$3.38000","currency":"USD"},{"qty":10,"price":"$3.04000","currency":"USD"},{"qty":25,"price":"$2.87400","currency":"USD"},{"qty":100,"price":"$2.49070","currency":"USD"},{"qty":250,"price":"$2.36300","currency":"USD"},{"qty":500,"price":"$2.12032","currency":"USD"},{"qty":1000,"price":"$1.80750","currency":"USD"},{"qty":2500,"price":"$1.80750","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/c7b8740f5129cb2b73ecb4da5d273317.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TLV2454IDR/alternatives.json"},"ai":{"faq":[{"question":"What is the closest functional alternative to TLV2454IDR?","answer":"The OPA4374AIPWT from Texas Instruments is a quad CMOS op-amp in the same 14-SOIC package with a 6.5 MHz GBW and 5 V/µs slew rate — faster than the TLV2454IDR but draws 600 µA per channel. For a drop-in with similar power but higher speed, the TLV9362IDDFR (dual) or TLV9351IDCKR (single) offer 10.6 MHz and 3.5 MHz respectively, though they are not quad-channel."},{"question":"Does TLV2454IDR have rail-to-rail output?","answer":"Yes, the output swings rail-to-rail, allowing the signal to use the full ADC input range when powered from a single supply."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV2454IDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV2454IDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}