{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV2452CP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV2452CP","canonicalUrl":"https://icboms.com/texas-instruments/TLV2452CP","factsUrl":"https://icboms.com/api/mcp/products/TLV2452CP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV2452CP, dual general-purpose op-amp, 220 kHz gain bandwidth, 0.11 V/µs slew rate, rail-to-rail output, 23 µA supply per channel, 2.7 V to 6 V supply, 8-DIP through-hole package, 0°C to 70°C.","salesMarkdown":"## 220 kHz gain bandwidth — micropower signal conditioning This puts it squarely in the micropower, low-frequency signal-conditioning class — think sensor buffering, battery monitoring, and DC-level translation where the signal bandwidth stays under a few kilohertz. The 23 µA supply current per channel (both channels together draw 23 µA × 2) makes it a strong candidate for always-on analog front ends in portable or loop-powered equipment. ## Rail-to-rail output, 2.7 V to 6 V supply The output swings rail-to-rail, which is useful when running from a single 3 V or 5 V rail and you need the full dynamic range into an ADC or comparator. ## 8-DIP through-hole — bench-friendly, reworkable That means it sockets cleanly into a standard DIP-8 socket, survives multiple soldering cycles, and is trivial to replace under a hot-air station or with a desoldering iron. For a prototype, repair bench, or low-volume production run, this package is a practical advantage over a tiny SOT-23 or MSOP. That restricts this part to indoor, climate-controlled environments — office equipment, benchtop instruments, consumer appliances, and similar. Not rated for automotive under-hood, outdoor telecom cabinets, or factory-floor applications where the ambient can dip below freezing or climb above 70°C. ## Active lifecycle — no obsolescence worry The part is also ROHS3 compliant.","metaTitle":"Texas Instruments TLV2452CP dual op-amp, 220 kHz","metaDescription":"Texas Instruments TLV2452CP dual general-purpose op-amp, 220 kHz GBW, 0.11 V/µs slew rate, rail-to-rail output, 23 µA per channel, 8-DIP through-hole.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Bulk","Slew Rate":"0.11V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"23µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"500 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"220 kHz","Voltage - Input Offset":"300 µV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"10 mA","Voltage - Supply Span (Max)":"6 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.53","stockQuantity":0,"priceTiers":[{"qty":566,"price":"$0.53000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/469e8bd533518b03ad7095b5e74d7f79.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is TLV2452CP rail-to-rail?","answer":"Yes, the TLV2452CP has a rail-to-rail output stage. The input common-mode range is not rail-to-rail, but the output can swing to within millivolts of both supply rails, which is useful for single-supply designs."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV2452CP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV2452CP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}