{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV2422MUB","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV2422MUB","canonicalUrl":"https://icboms.com/texas-instruments/TLV2422MUB","factsUrl":"https://icboms.com/api/mcp/products/TLV2422MUB","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV2422MUB, Automotive AEC-Q100 LinCMOS™, dual general-purpose op amp, 5.3 MHz GBW, 0.02 V/µs slew rate, rail-to-rail output, 100 µA per channel, 2.7–10 V supply, -55 to 125°C, 10-CFP hermetic ceramic flatpack.","salesMarkdown":"## AEC-Q100 dual op amp in a hermetic ceramic flatpack It delivers a gain-bandwidth product of 5.3 MHz with a supply current of just 100 µA per channel, making it a fit for always-on sensor conditioning in battery-backed or thermally harsh environments. The rail-to-rail output stage allows direct interface to ADCs or comparators without a second supply rail. The 0.02 V/µs slew rate is the headline limitation on this part. At full 10 V output swing, the maximum undistorted frequency is roughly 300 Hz. For a 1 V peak-to-peak signal, that extends to about 3 kHz. This is not a part for audio line drivers, fast ADC buffers, or any waveform requiring more than a few kilohertz of small-signal bandwidth. Where it works is DC-accurate amplification, thermocouple conditioning, strain-gauge bridges, and any low-frequency loop where the 5.3 MHz GBW is used for DC gain, not AC bandwidth. ## 100 µA per channel — the battery-life enabler At 100 µA per channel quiescent, the TLV2422MUB draws 200 µA total for both amplifiers. In a 24/7 sensor node powered by a 500 mAh primary cell, that alone accounts for about 4 mA·h per day — leaving most of the budget for the MCU and radio. The 1 pA input bias current (typical) also means the external resistor divider or photodiode bias network does not need to fight a DC error term. For always-on automotive cabin sensors or remote industrial transmitters, this quiescent number is the selection gate. ## Hermetic 10-CFP — procurement implications The 10-CDFF / 10-CFP is a ceramic dual flatpack with gold-plated leads, not a plastic SOIC or TSSOP. This package is standard for high-reliability programs that require hermeticity — MIL-STD-883 screening, space-level lot acceptance, or long-life sealed modules. The surface-mount footprint is non-standard compared to JEDEC plastic packages; verify the land pattern against the package drawing before committing the PCB. Sourcing is through independent distribution channels that handle ceramic and hi-rel inventory; this is not a part stocked in high volume at general-purpose distributors.","metaTitle":"TLV2422MUB Texas Instruments Op Amp, AEC-Q100, 5.3 MHz","metaDescription":"Texas Instruments TLV2422MUB dual general-purpose op amp, AEC-Q100 qualified, 5.3 MHz GBW, 0.02 V/µs slew rate, rail-to-rail output, 100 µA per channel, -55 to","metaKeywords":null},"attributes":{"series":"Automotive, AEC-Q100, LinCMOS™","packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"Automotive, AEC-Q100, LinCMOS™","Package":"Bulk","Slew Rate":"0.02V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"10-CDFF","lifecycle_stage":"eol_hot","Current - Supply":"100µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"1 pA","Operating Temperature":"-55°C ~ 125°C (TA)","Gain Bandwidth Product":"5.3 MHz","Voltage - Input Offset":"300 µV","Supplier Device Package":"10-CFP","Current - Output / Channel":"12 mA","Voltage - Supply Span (Max)":"10 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$29.9","stockQuantity":0,"priceTiers":[{"qty":11,"price":"$29.90000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/2cfca921e9b873612994b19c2eea80cb.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the closest functional second-source for TLV2422MUB?","answer":"It is not a pin-compatible drop-in replacement due to the different package and footprint."},{"question":"Can TLV2422MUB replace TLV2422ID?","answer":"The TLV2422ID is the same die in a plastic SOIC-8 package. The TLV2422MUB uses a hermetic 10-CFP ceramic package with a different footprint and pinout. Electrically the two are equivalent, but the PCB land pattern and thermal management differ — verify the package drawing before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV2422MUB","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV2422MUB when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}