{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV2422MJGB","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV2422MJGB","canonicalUrl":"https://icboms.com/texas-instruments/TLV2422MJGB","factsUrl":"https://icboms.com/api/mcp/products/TLV2422MJGB","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV2422MJGB, Automotive AEC-Q100 LinCMOS™ dual general-purpose op-amp, 5.3 MHz GBW, 0.02 V/µs slew rate, rail-to-rail output, 100 µA supply per channel, -55 to 125°C, 8-CDIP through-hole package.","salesMarkdown":"The rail-to-rail output stage maximizes dynamic range at low supply voltages, and the 1 pA input bias current suits high-impedance sensor interfaces. ## Hermetic CDIP-8 — why the package matters This part comes in an 8-pin ceramic dual-in-line package (8-CDIP, 0.300\" body width), through-hole mount. The hermetic ceramic construction resists moisture and outgassing, so it is a natural choice for sealed assemblies, avionics, downhole tools, or any environment where a plastic SOIC would risk reliability. No moisture-sensitivity level (MSL) concern — store the tubes on the shelf, no bake required before reflow if the assembly process uses a solder pot or hand-solders the leads. Operates from a single supply as low as 2.7 V up to 10 V maximum. The 300 µV input offset voltage (maximum) is typical for a CMOS-input amplifier in this class — no auto-zero, but adequate for general-purpose signal conditioning where you are not amplifying microvolt-level signals. ## Lifecycle and sourcing posture It is RoHS non-compliant (the hermetic package uses lead-bearing solder dip on the leads), so factor that into any EU RoHS exemption paperwork.","metaTitle":"TLV2422MJGB Dual Op-Amp, 5.3 MHz, AEC-Q100, CDIP-8","metaDescription":"Texas Instruments TLV2422MJGB dual general-purpose op-amp, 5.3 MHz GBW, rail-to-rail output, 100 µA supply per channel, -55 to 125°C, AEC-Q100, CDIP-8.","metaKeywords":null},"attributes":{"series":"Automotive, AEC-Q100, LinCMOS™","packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"Automotive, AEC-Q100, LinCMOS™","Package":"Bulk","Slew Rate":"0.02V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"8-CDIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"100µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"1 pA","Operating Temperature":"-55°C ~ 125°C","Gain Bandwidth Product":"5.3 MHz","Voltage - Input Offset":"300 µV","Supplier Device Package":"8-CDIP","Current - Output / Channel":"50 mA","Voltage - Supply Span (Max)":"10 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$11.87","stockQuantity":0,"priceTiers":[{"qty":26,"price":"$11.87000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/8965be5a352839efeea5fa5414c41c0a.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the TLV2422MJGB equivalent or replacement?","answer":"No pin-compatible drop-in replacement is listed. The TLV9362IDDFR is a newer surface-mount dual op-amp with higher bandwidth (10.6 MHz) and faster slew rate (25 V/µs), but it comes in a plastic SOIC package and is not a direct footprint or temperature-range match for the hermetic CDIP-8 TLV2422MJGB."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV2422MJGB","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV2422MJGB when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}