{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV2401IDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV2401IDR","canonicalUrl":"https://icboms.com/texas-instruments/TLV2401IDR","factsUrl":"https://icboms.com/api/mcp/products/TLV2401IDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLV2401IDR, General Purpose Amplifier, 1 Circuit, Rail-to-Rail Output, 5.5 kHz Gain Bandwidth, 0.0025 V/µs Slew Rate, 2.5 V to 16 V Supply, 900 nA Supply Current, 8-SOIC Package, -40°C to 125°C.","salesMarkdown":"## 900 nA supply — the part that doesn't drain the battery Its headline draw is 900 nA typical supply current, which puts it firmly in the nanopower class — think battery-monitor front-ends, wearable sensor amplifiers, or always-on threshold detectors that run for years on a coin cell. Input bias current is 100 pA typical, so high-impedance sources like photodiodes or pH probes won't see a significant loading error. ## 5.5 kHz gain-bandwidth — what you trade for the low power The 5.5 kHz gain-bandwidth product and 0.0025 V/µs slew rate are the speed you give up to get that 900 nA quiescent current. This part will not drive a speaker or close a fast servo loop. What it will do is condition a 10 Hz temperature sensor output or buffer a slow electrochemical cell signal with negligible power cost. If your design needs to filter a 1 kHz signal, the TLV2401IDR won't have the loop gain — you'd step up to the TLV9351IDCKR (3.5 MHz GBW, 600 µA supply) and pay the power penalty.","metaTitle":"TLV2401IDR nanopower op-amp, 900 nA supply, 5.5 kHz GBW","metaDescription":"TI TLV2401IDR general-purpose op-amp: 900 nA supply, rail-to-rail output, 2.5 V to 16 V, 5.5 kHz GBW, 8-SOIC. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.0025V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"900nA","Number of Circuits":"1","Current - Input Bias":"100 pA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"5.5 kHz","Voltage - Input Offset":"390 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"200 µA","Voltage - Supply Span (Max)":"16 V","Voltage - Supply Span (Min)":"2.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.4","priceTiers":[{"qty":1,"price":"$2.40000","currency":"USD"},{"qty":10,"price":"$2.15200","currency":"USD"},{"qty":25,"price":"$2.03000","currency":"USD"},{"qty":100,"price":"$1.72950","currency":"USD"},{"qty":250,"price":"$1.62392","currency":"USD"},{"qty":500,"price":"$1.42092","currency":"USD"},{"qty":1000,"price":"$1.17734","currency":"USD"},{"qty":2500,"price":"$1.14900","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/4ecc6fabf2088e522d007f0c73b9898e.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TLV2401IDR/alternatives.json"},"ai":{"faq":[{"question":"What is the supply current of the TLV2401IDR?","answer":"Typical supply current is 900 nA. That's the defining spec of this nanopower op-amp — it's what lets the part run for years on a small battery in always-on sensing applications."},{"question":"Can the TLV2401IDR be used in a single-supply 1.8 V circuit?","answer":"No — the minimum supply span is 2.5 V. A 1.8 V rail is below the operating floor; the part will not power up correctly. For a 1.8 V design you would need an op-amp rated for that lower supply, such as the TLV8541 (1.5 V minimum)."},{"question":"What is the closest functional second-source for the TLV2401IDR?","answer":"The TLV9351IDCKR is a same-function general-purpose op-amp from TI with rail-to-rail output and a similar pinout, but it draws 600 µA supply current and offers 3.5 MHz gain-bandwidth — a very different power/speed trade-off. For a true nanopower replacement, look at the TLV8541 series (1.5 V to 3.6 V, 500 nA typical) or the OPA4374AIPWT (quad, 6.5 MHz, 600 µA per channel). No pin-compatible drop-in exists with identical 900 nA quiescent current."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV2401IDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV2401IDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}