{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV2382ID","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV2382ID","canonicalUrl":"https://icboms.com/texas-instruments/TLV2382ID","factsUrl":"https://icboms.com/api/mcp/products/TLV2382ID","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments microPOWER™ series, TLV2382ID dual general-purpose op-amp, 160 kHz gain bandwidth, 7 µA supply per channel, rail-to-rail output, 8-SOIC package, tube.","salesMarkdown":"## Active dual op-amp for continuous-monitoring signal chains The TLV2382ID is an active-production dual general-purpose op-amp from Texas Instruments' microPOWER™ series, meaning it is available for both new designs and existing BOM lines without last-time-buy risk. Each of the two amplifiers draws 7 µA supply current, so the total quiescent draw for the package is 14 µA — low enough to leave on continuously in a battery-powered sensor node without draining the cell between measurement cycles. ## 160 kHz bandwidth with 0.06 V/µs slew rate — what it means for signal conditioning The 160 kHz gain-bandwidth product sets the usable closed-loop gain at a given frequency: at a gain of 10 the signal bandwidth is about 16 kHz, which covers most slow industrial sensor outputs (thermocouples, strain gauges, pressure transducers) without aliasing into a downstream ADC sampling at a few hundred hertz. A 0.06 V/µs slew rate limits the large-signal output swing at higher frequencies — for a 1 V peak-to-peak output the full-power bandwidth is roughly 9.5 kHz, so the part is suited for DC or low-frequency AC signals rather than fast transients. Input bias current is 1 pA typical, which allows direct connection to high-impedance sources (10 MΩ sensors) without a buffer stage — the voltage error from bias current flowing through the source resistance stays below 10 µV. ## Supply range, output swing, and temperature grade Operates from a 2.7 V to 16 V single supply or split supplies — the wide span means it can run directly from a 3.3 V or 5 V rail without an extra regulator, and the 16 V ceiling covers 12 V industrial buses with margin. Rail-to-rail output stage swings within a few millivolts of each supply rail, preserving dynamic range in low-voltage single-supply designs where every millivolt of headroom matters. Rated for -40°C to +125°C ambient — the full industrial temperature band, so it fits engine-bay electronics, outdoor instrumentation enclosures, and factory-floor sensor modules without a temperature grade upgrade. ## 8-SOIC package and compliance footprint Housed in an 8-SOIC (3.90 mm width) surface-mount package, supplier device package 8-SOIC — the standard narrow-body SOIC footprint that matches most dual op-amp PCB layouts and reflow profiles. RoHS3 compliant per the lifecycle record, so the part passes the material declaration requirements for EU and UK markets without an exemption review.","metaTitle":"TLV2382ID Texas Instruments microPOWER™ Op-Amp, 160 kHz","metaDescription":"TLV2382ID dual general-purpose op-amp from TI microPOWER™ series. 160 kHz GBW, 7 µA supply per channel, rail-to-rail output, -40 to +125°C. Active, RoHS3.","metaKeywords":null},"attributes":{"series":"microPOWER™","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Series":"microPOWER™","Package":"Tube","Slew Rate":"0.06V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"7µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"1 pA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"160 kHz","Voltage - Input Offset":"500 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"400 µA","Voltage - Supply Span (Max)":"16 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.81","priceTiers":[{"qty":1,"price":"$2.81000","currency":"USD"},{"qty":10,"price":"$2.52500","currency":"USD"},{"qty":25,"price":"$2.38720","currency":"USD"},{"qty":100,"price":"$2.06910","currency":"USD"},{"qty":250,"price":"$1.96296","currency":"USD"},{"qty":500,"price":"$1.76136","currency":"USD"},{"qty":1000,"price":"$1.50150","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/a4cdf2a8ca6773198821910a9310c39f.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TLV2382ID/alternatives.json"},"ai":{"faq":[{"question":"What is the supply current per amplifier on the TLV2382ID?","answer":"Each of the two amplifiers draws 7 µA supply current, for a total quiescent current of 14 µA per package. This makes the part appropriate for always-on signal conditioning in battery-powered or energy-harvesting applications."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV2382ID","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV2382ID when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}