{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLV2264IDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLV2264IDR","canonicalUrl":"https://icboms.com/texas-instruments/TLV2264IDR","factsUrl":"https://icboms.com/api/mcp/products/TLV2264IDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LinCMOS™ TLV2264IDR quad CMOS operational amplifier, 710 kHz gain bandwidth, rail-to-rail output, 14-SOIC (0.154\", 3.90 mm width), surface mount, tape and reel.","salesMarkdown":"## Package and board integration The TLV2264IDR comes in a 14-SOIC package (0.154\" body width, 3.90 mm), a standard footprint that hand-solders cleanly with a fine-tip iron or hot-air station — no reflow oven required for prototype runs. Supplier device package is 14-SOIC; the 1.27 mm pin pitch gives enough room for manual routing on a two-layer board without vias under the body. ## What the key ratings mean for your signal chain Four CMOS amplifier channels in one 14-SOIC — the 710 kHz gain-bandwidth product handles audio-band filtering, sensor conditioning, and low-speed data acquisition without breaking a sweat. Rail-to-rail output swing means the op-amp can drive its output within millivolts of the supply rails — useful when running from a 3.3 V or 5 V single supply and you need the full ADC input range. Slew rate of 0.55 V/µs limits the large-signal bandwidth — expect about 8.7 kHz full-power bandwidth at 5 V output swing, so keep fast edges for the small-signal path. Input bias current of 50 pA (typical) lets you use high-impedance sensors like pH probes or photodiodes without adding a separate buffer stage. Supply span from 2.7 V to 8 V covers single lithium-ion, 3.3 V logic rails, and 5 V industrial supplies — no extra regulator needed if your rail falls in that window. ## Temperature grade and operating environment Rated for -40°C to +125°C ambient — this is the industrial temperature band, suitable for outdoor telecom cabinets, engine-bay-adjacent electronics, and factory-floor sensor modules. Each channel draws 1.5 mA supply current (total 6 mA for the quad), keeping the self-heating low enough that the 125°C limit is driven by ambient, not die temperature. ## Sourcing and lifecycle reality ROHS3 compliant — no exemptions for lead in solder or any of the six restricted substances, so it ships into EU and UK markets without a RoHS waiver. Available in Tape & Reel (TR) or Cut Tape (CT) — the CT option is handy for prototype quantities without committing to a full reel.","metaTitle":"TLV2264IDR CMOS Op-Amp, 4-Ch, Rail-to-Rail, 710 kHz","metaDescription":"Texas Instruments TLV2264IDR quad CMOS op-amp, 710 kHz GBW, rail-to-rail output, 14-SOIC. Active production, ROHS3 compliant. Sourced to order.","metaKeywords":null},"attributes":{"series":"LinCMOS™","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Series":"LinCMOS™","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.55V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"CMOS","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1.5mA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"50 pA","Operating Temperature":"-40°C ~ 125°C (TA)","Gain Bandwidth Product":"710 kHz","Voltage - Input Offset":"300 µV","Supplier Device Package":"14-SOIC","Current - Output / Channel":"50 mA","Voltage - Supply Span (Max)":"8 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.99","priceTiers":[{"qty":1,"price":"$2.99000","currency":"USD"},{"qty":10,"price":"$2.68700","currency":"USD"},{"qty":25,"price":"$2.54000","currency":"USD"},{"qty":100,"price":"$2.20140","currency":"USD"},{"qty":250,"price":"$2.08848","currency":"USD"},{"qty":500,"price":"$1.87398","currency":"USD"},{"qty":1000,"price":"$1.59750","currency":"USD"},{"qty":2500,"price":"$1.59750","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/44088dd1f7a4977d726e3c5c9c211a20.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TLV2264IDR/alternatives.json"},"ai":{"faq":[{"question":"What supply voltage range does the TLV2264IDR need?","answer":"It operates from 2.7 V to 8 V total supply span — that covers a single lithium-ion cell, 3.3 V logic, and 5 V industrial rails without an extra regulator."},{"question":"What compliance documentation does Texas Instruments provide for TLV2264IDR?","answer":"The part is ROHS3 compliant, meaning it meets the EU RoHS directive without any exempted lead or restricted substances. No UL or IEC certification is listed in the standard documentation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLV2264IDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLV2264IDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}