{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLP2719(E","brand":"Toshiba Semiconductor","brandSlug":"toshiba","productSlug":"TLP2719E","canonicalUrl":"https://icboms.com/toshiba/TLP2719E","factsUrl":"https://icboms.com/api/mcp/products/TLP2719(E","rawCanonicalId":null},"summary":{"shortDescription":"Toshiba TLP2719(E optocoupler, 1-channel DC input, open collector output, 1MBd data rate, 5000Vrms isolation, 800ns max propagation delay, 10kV/µs CMTI, 4.5V–20V supply, -40°C–100°C, 6-SOIC package, Tube.","salesMarkdown":"## What this optocoupler brings to an isolated interface The Toshiba TLP2719(E is a single-channel, DC-input optocoupler with an open-collector output, rated for 1MBd data rate and 5000Vrms isolation. It fits digital isolation in industrial PLCs, motor-drive I/O, and inverter gate-drive interfaces where you need to pass a logic-level signal across a high-voltage barrier without coupling noise back into the control side. The 5000Vrms isolation rating is the spec that decides whether this part works in a 230VAC motor-drive or a 400V inverter bus. It provides reinforced insulation for safety-agency compliance (IEC 60950-1 / IEC 62368-1) in equipment where the control and power stages must be galvanically separated. For a 12V or 24V industrial sensor interface, the 4.5V to 20V supply range lets you run the output side directly off the same rail as the PLC input module — no extra regulator needed. ## 1MBd data rate and 800ns propagation delay — timing budget check At 1MBd and 800ns max propagation delay, this optocoupler handles PLC digital inputs and inverter fault signals. ## Open-collector output — resistor sizing The open-collector output sinks up to 8 mA per channel. For a 5V logic interface, a 1kΩ pull-up to 5V gives a clean 5 mA sink — well inside the rating. At 24V, a 3.3kΩ pull-up keeps the sink current under 8 mA. The 25mA max LED forward current gives enough headroom to drive the input from a 3.3V or 5V logic output through a series resistor (typically 330Ω for 5V). ## Package and temperature grade Housed in a 6-SOIC wide-body package (7.50mm body width) with 7.62mm creepage distance, the TLP2719(E) suits surface-mount assembly on standard FR4.","metaTitle":"TLP2719(E Optocoupler, 1MBd, Open Collector, 5000Vrms","metaDescription":"TLP2719(E from Toshiba: 1-channel DC-input optocoupler, 1MBd data rate, open collector output, 5000Vrms isolation, 800ns propagation delay, 10kV/µs CMTI.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Optoisolators"],"specifications":{"Package":"Tube","Data Rate":"1MBd","Input Type":"DC","Output Type":"Open Collector","Mounting Type":"Surface Mount","Package / Case":"6-SOIC (0.295\\\", 7.50mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"4.5V ~ 20V","Number of Channels":"1","Voltage - Isolation":"5000Vrms","Operating Temperature":"-40°C ~ 100°C","Inputs - Side 1/Side 2":"1/0","Supplier Device Package":"6-SO","Current - Output / Channel":"8 mA","Voltage - Forward (Vf) (Typ)":"1.6V","Current - DC Forward (If) (Max)":"25mA","Propagation Delay tpLH / tpHL (Max)":"800ns, 800ns","Common Mode Transient Immunity (Min)":"10kV/µs"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.72","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$1.72000","currency":"USD"},{"qty":10,"price":"$1.08600","currency":"USD"},{"qty":100,"price":"$0.80350","currency":"USD"},{"qty":500,"price":"$0.73832","currency":"USD"},{"qty":1000,"price":"$0.60802","currency":"USD"},{"qty":2000,"price":"$0.57762","currency":"USD"},{"qty":5000,"price":"$0.56459","currency":"USD"},{"qty":10000,"price":"$0.55156","currency":"USD"}]},"links":{"datasheetUrl":"https://toshiba.semicon-storage.com/info/TLP2719_datasheet_en_20180521.pdf?did=61847&prodName=TLP2719","sourceUrl":null},"ai":{"faq":[{"question":"What is the data rate and output type of TLP2719(E)?","answer":"The TLP2719(E) supports a 1MBd data rate and has an open-collector output. It is a DC-input, single-channel optocoupler."},{"question":"Does TLP2719(E) require an external resistor for the output?","answer":"Yes, because the output is open collector, you need an external pull-up resistor to the supply voltage. The output sinks up to 8 mA, so size the pull-up accordingly (e.g., 1kΩ for 5V, 3.3kΩ for 24V)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/toshiba/TLP2719E","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/toshiba/TLP2719E when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}