{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLP2662(F)","brand":"Toshiba Semiconductor","brandSlug":"toshiba","productSlug":"TLP2662F","canonicalUrl":"https://icboms.com/toshiba/TLP2662F","factsUrl":"https://icboms.com/api/mcp/products/TLP2662(F)","rawCanonicalId":null},"summary":{"shortDescription":"Toshiba TLP2662(F) dual-channel optocoupler, open-collector output, 10MBd data rate, 5000Vrms isolation, 8-DIP through-hole package, -40°C to 125°C.","salesMarkdown":"## Dual-channel 10MBd optocoupler with 5 kV isolation The Toshiba TLP2662(F) is a dual-channel optocoupler with open-collector outputs rated for 10MBd data rates and 5000Vrms isolation. ## 5000Vrms isolation and 20kV/µs transient immunity The 5000Vrms isolation voltage is the primary spec that determines where this part fits in a BOM. In a motor-drive design with 600V DC bus, that rating provides reinforced insulation per IEC 60747-5-5, so you can use it for gate-driver feedback or fault-signal isolation without a second barrier. The 20kV/µs common-mode transient immunity means the outputs stay clean when the IGBTs switch at several kV/µs — a common failure mode for slower optos in inverter stages. ## 10MBd data rate with fast edges At 10MBd with 12ns rise and 3ns fall times, the TLP2662(F) handles digital signals like SPI clock lines, encoder A/B channels, or CAN transceiver isolation without adding jitter or pulse-width distortion. The 75ns max propagation delay (both directions) is symmetric, which simplifies timing budget calculations in half-duplex links. ## Supply range and drive current The output side runs on 2.7V to 5.5V, so it interfaces directly with 3.3V or 5V logic without a level shifter. The LED forward voltage is 1.55V typical, and the forward current limit is 20 mA — standard for logic-level optocouplers. ## Through-hole DIP-8 — legacy board retrofit The 8-DIP package with 0.300\" (7.62mm) pin spacing is the classic through-hole format. If you are retrofitting an older PLC or motor-drive board that originally used a single-channel DIP-8 opto, this dual-channel part can replace two of them in the same footprint, freeing up board space. The through-hole body also suits hand-assembly or rework in low-volume production.","metaTitle":"TLP2662(F) Toshiba Optocoupler, 10MBd, 5000Vrms, 8-DIP","metaDescription":"Toshiba TLP2662(F) dual-channel open-collector optocoupler. 10MBd data rate, 5000Vrms isolation, 20kV/µs CMTI. -40°C to 125°C. Active, ROHS3 compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Optoisolators"],"specifications":{"Package":"Tube","Data Rate":"10MBd","Input Type":"DC","Output Type":"Open Collector","Mounting Type":"Through Hole","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Voltage - Supply":"2.7V ~ 5.5V","Number of Channels":"2","Voltage - Isolation":"5000Vrms","Operating Temperature":"-40°C ~ 125°C","Inputs - Side 1/Side 2":"2/0","Rise / Fall Time (Typ)":"12ns, 3ns","Supplier Device Package":"8-DIP","Current - Output / Channel":"25 mA","Voltage - Forward (Vf) (Typ)":"1.55V","Current - DC Forward (If) (Max)":"20mA","Propagation Delay tpLH / tpHL (Max)":"75ns, 75ns","Common Mode Transient Immunity (Min)":"20kV/µs"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.8","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$1.80000","currency":"USD"},{"qty":10,"price":"$1.20300","currency":"USD"},{"qty":100,"price":"$0.92600","currency":"USD"},{"qty":500,"price":"$0.83708","currency":"USD"},{"qty":1000,"price":"$0.71937","currency":"USD"},{"qty":2000,"price":"$0.68014","currency":"USD"},{"qty":5000,"price":"$0.66444","currency":"USD"},{"qty":10000,"price":"$0.65398","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/26c0dbca04540ddb9a2af8bad7028bfe.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the data rate of TLP2662(F)?","answer":"The TLP2662(F) is rated for 10MBd data rate. With 12ns rise and 3ns fall times, it handles fast digital signals like SPI or encoder outputs cleanly."},{"question":"What is the replacement for TLP2662(F)?","answer":"There is no direct replacement listed by Toshiba. The TLP2662(TP1,F) is the same die in a surface-mount package (SO-8), not a through-hole alternate. If you need a pin-compatible second source, check the TLP2362 single-channel family, but note the lower isolation (3750Vrms) and slower edges (30ns)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/toshiba/TLP2662F","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/toshiba/TLP2662F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}