{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLE49681LHALA1","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"TLE49681LHALA1","canonicalUrl":"https://icboms.com/infineon/TLE49681LHALA1","factsUrl":"https://icboms.com/api/mcp/products/TLE49681LHALA1","rawCanonicalId":null},"summary":{"shortDescription":"Infineon TLE49681LHALA1, Automotive AEC-Q100 bipolar Hall-effect switch, –40 to 170°C junction, 3 V supply, open-drain output, through-hole SSO-3-2 package.","salesMarkdown":"## What this Hall switch is and where it fits The TLE49681LHALA1 is an automotive-grade bipolar Hall-effect switch from Infineon, part of a series qualified to AEC-Q100. It is specified for a junction temperature range of –40 to 170°C, which covers underhood, transmission, and engine-mount positions where commercial Hall sensors would drift or fail. It operates from a 3 V supply rail and delivers an open-drain output that sinks up to 25 mA. The low 2.5 mA switching current keeps the load on the microcontroller GPIO light. The bipolar switch function means the output latches when a magnetic field of either polarity exceeds the threshold and releases only when the opposite polarity is applied — the trip points are ±2.25 mT. This makes it suitable for rotational speed sensing using a ring magnet where each pole pair toggles the output. ## Temperature grade and what it means for sourcing The TLE49681LHALA1 carries an active lifecycle status, meaning Infineon continues to manufacture it without a planned end-of-life notice. The through-hole SSO-3-2 package is a standard three-pin footprint that can be hand-soldered or wave-soldered — no reflow-profile concerns. Sourcing this part against a BOM line is straightforward: it is available in Cut Tape or Tape & Box from multiple distribution channels. No single-source flag — the Infineon TLE4968x family shares the same footprint, but confirm the exact magnetic threshold and temperature grade for your application before substituting. ## Magnetic threshold and output behaviour The switch responds to both north and south poles with a symmetric trip of 2.25 mT and a release of –2.25 mT. This hysteresis prevents output chatter near the threshold. The open-drain output requires an external pull-up resistor to the microcontroller supply. Temperature compensation is built into the Hall plate to keep the magnetic thresholds stable across the –40 to 170°C range. Without it, the sensitivity would drift with the Hall coefficient and the switch point would shift by several mT over temperature.","metaTitle":"TLE49681LHALA1 Infineon Automotive AEC-Q100","metaDescription":"TLE49681LHALA1 bipolar Hall switch from Infineon, AEC-Q100 qualified, –40 to 170°C junction, 3 V supply, open-drain output. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Sensors & Transducers"],"specifications":{"series":"Automotive, AEC-Q100","has_mpn":"TLE49681","feature_list":"Temperature Compensated","package_type":"Cut Tape (CT); Tape & Box (TB)","polarization":"North Pole, South Pole","mounting_type":"Through Hole","output_signal":"Open Drain","Test Condition":"25°C","product_status":"Active","lifecycle_stage":"eol_hot","timing_function":"Bipolar Switch","supply_voltage_v":"3.0","switching_current_a":"0.0025","output_current_max_a":"0.025","sensing_distance_max_mm":"2.25mT Trip, -2.25mT Release","Operating Temperature High":"-40°C to 170°C(TJ)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.88","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/c2941a8d0c2e3fc0318a5213a766e3a9.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Does TLE49681LHALA1 require an external pull-up resistor?","answer":"Yes, the open-drain output needs a pull-up resistor to the logic supply voltage. The resistor value depends on the bus capacitance and desired rise time; 4.7 kΩ to 10 kΩ is typical for a 3.3 V microcontroller input."},{"question":"Is TLE49681LHALA1 suitable for high-temperature environments?","answer":"Yes, it is specified for a junction temperature range of –40 to 170°C, which covers underhood, transmission, and exhaust-adjacent locations in automotive systems. The AEC-Q100 qualification confirms it has passed the required reliability tests for those conditions."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/TLE49681LHALA1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/TLE49681LHALA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T20:11:22.204Z","lastPublished":"2026-07-17T20:11:22.204Z","indexable":true}}