{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLE2161AID","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLE2161AID","canonicalUrl":"https://icboms.com/texas-instruments/TLE2161AID","factsUrl":"https://icboms.com/api/mcp/products/TLE2161AID","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments Excalibur™ TLE2161AID JFET operational amplifier, single circuit, 6.4 MHz gain bandwidth, 10 V/µs slew rate, 8-SOIC surface-mount package, tube.","salesMarkdown":"## What the 6.4 MHz GBW and 10 V/µs slew rate mean on the bench The TLE2161AID is a single-channel JFET-input op-amp from TI's Excalibur™ line, packing 6.4 MHz gain-bandwidth and 10 V/µs slew rate into an 8-SOIC package. The JFET front end keeps input bias current at 4 pA typical, which matters when you are buffering a high-impedance sensor or a photodiode — the bias current won't swamp the signal. The 290 µA supply current is low enough that this part can live on a shared rail in a multi-op-amp design without blowing the power budget. The 10 V/µs slew rate means the output can swing 10 V in one microsecond, so for a ±5 V supply rail the full-scale step settles in about a microsecond. That is fast enough for audio processing, active filters in the 100 kHz range, and general-purpose signal conditioning where you need clean transient response without excessive overshoot. ## Supply rails and temperature grade — fits industrial control boards The TLE2161AID runs on a supply span from 7 V minimum up to 36 V maximum, so it works off common rails like ±5 V, ±12 V, or ±15 V without needing an extra regulator. The -40°C to 85°C operating range covers most industrial enclosures, outdoor telecom cabinets, and factory-floor panels where the ambient stays below 85°C. Output can source or sink 80 mA per channel, which is enough to drive a 600 Ω audio line, a small relay coil through a transistor, or the input of an ADC without a separate buffer stage. The 500 µV typical input offset voltage is reasonable for a general-purpose JFET part — you will not use it for microvolt-level precision, but it is fine for 0.1% accuracy in a 10 V full-scale system. ## Package and lifecycle — active, RoHS3, 8-SOIC Supplied in tube packaging, which is the typical through-hole-friendly format for prototype and low-volume production. For reel quantities, check the alternate order codes in the series.","metaTitle":"TI TLE2161AID JFET Op-Amp, 6.4 MHz, 10 V/µs, 8-SOIC","metaDescription":"Texas Instruments TLE2161AID JFET op-amp, single circuit, 6.4 MHz GBW, 10 V/µs slew rate, 290 µA supply, 8-SOIC. Active, RoHS3 compliant. Quoted to order.","metaKeywords":null},"attributes":{"series":"Excalibur™","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Series":"Excalibur™","Package":"Tube","Slew Rate":"10V/µs","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"290µA","Number of Circuits":"1","Current - Input Bias":"4 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"6.4 MHz","Voltage - Input Offset":"500 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"80 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.42","priceTiers":[{"qty":1,"price":"$4.42000","currency":"USD"},{"qty":10,"price":"$3.96600","currency":"USD"},{"qty":25,"price":"$3.74920","currency":"USD"},{"qty":100,"price":"$3.24930","currency":"USD"},{"qty":250,"price":"$3.08268","currency":"USD"},{"qty":500,"price":"$2.76610","currency":"USD"},{"qty":1000,"price":"$2.35800","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/8515822d9f57cd8efc99ca8b49f99ed9.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TLE2161AID/alternatives.json"},"ai":{"faq":[{"question":"What is the closest functional second-source to TLE2161AID — TLV9351IDCKR?","answer":"The TLV9351IDCKR is a general-purpose op-amp with a 3.5 MHz GBW and 20 V/µs slew rate, but it is not a JFET input — its input bias current is 10 pA versus the TLE2161AID's 4 pA. The TLV9351 also has a rail-to-rail output, while the TLE2161AID does not. They share the same 8-SOIC footprint, so a board swap is possible, but the input stage difference means the TLV9351 will not match the TLE2161AID's low-bias performance in high-impedance circuits."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLE2161AID","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLE2161AID when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}