{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLE2082AMP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLE2082AMP","canonicalUrl":"https://icboms.com/texas-instruments/TLE2082AMP","factsUrl":"https://icboms.com/api/mcp/products/TLE2082AMP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLE2082AMP, J-FET dual op-amp, 10 MHz gain bandwidth, 45 V/µs slew rate, ±4.5 V to ±38 V supply, -55°C to 125°C, 8-DIP through-hole, Bulk.","salesMarkdown":"It delivers a 10 MHz gain-bandwidth product and a 45 V/µs slew rate, supplied from a single or split rail spanning 4.5 V to 38 V total. ## Rated for the harsh edge — military temperature range That means it is specified for avionics, satellite payloads, missile guidance electronics, and downhole instrumentation — environments where the ambient swings past what industrial-grade parts survive. If your BOM calls out a -55°C to 125°C op-amp in a DIP-8 footprint, the TLE2082AMP is a direct fit. With a 45 V/µs slew rate and 10 MHz gain-bandwidth, this part can swing a 10 V peak-to-peak output at frequencies approaching 700 kHz before the slew-rate limit sets in. That is enough headroom for fast pulse amplification, video-line drivers, and high-speed data acquisition front-ends where a slower op-amp would introduce slew-induced distortion. The 48 mA output per channel also gives it the drive to handle moderate capacitive loads or feed a downstream ADC input stage directly. ## Package and mounting — through-hole DIP for socketed or high-reliability boards It is the standard footprint for socketed designs — useful in burn-in boards, evaluation platforms, and legacy equipment where a soldered SOIC or MSOP would complicate field replacement. ## Compliance and lifecycle — active, but RoHS non-compliant However, it is marked RoHS non-compliant — the leads and internal construction contain lead (Pb). That is a standard condition for many high-reliability and military-grade parts, but it blocks use in EU RoHS-regulated consumer or commercial products unless an exemption applies. If your project requires RoHS compliance, you will need to look at the TLE2082AID (SOIC) or a surface-mount sibling; the DIP variant stays in the legacy, leaded channel.","metaTitle":"TLE2082AMP Dual JFET Op-Amp, 10 MHz, 45 V/µs, 8-DIP","metaDescription":"Texas Instruments TLE2082AMP dual JFET op-amp: 10 MHz GBW, 45 V/µs slew rate, -55 to 125°C, 8-DIP through-hole. Active, RoHS non-compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Bulk","Slew Rate":"45V/µs","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"3.1mA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"20 pA","Operating Temperature":"-55°C ~ 125°C (TA)","Gain Bandwidth Product":"10 MHz","Voltage - Input Offset":"700 µV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"48 mA","Voltage - Supply Span (Max)":"38 V","Voltage - Supply Span (Min)":"4.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.49","stockQuantity":0,"priceTiers":[{"qty":202,"price":"$1.49000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/f028d06eae1062ff784998abe3d88b9a.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is TLE2082AMP's listed slew rate?","answer":"The TLE2082AMP is specified with a 45 V/µs slew rate. That is a fast-slewing JFET op-amp — roughly double the 20 V/µs of a typical TL082-class device — giving it the ability to handle fast pulse edges and high-frequency signals without slew-rate distortion."},{"question":"Is TLE2082AMP equivalent to TL072 or other JFET op-amps?","answer":"The TLE2082AMP is a dual JFET op-amp in the same functional family as the TL072 and TL082, but it is not a direct pin-compatible drop-in for those parts in all respects. The TLE2082AMP offers a higher slew rate (45 V/µs vs 13 V/µs for TL072) and wider supply range (up to 38 V total), and it is specified over the full -55°C to 125°C military temperature range. For a pin-compatible upgrade in a high-speed or extended-temperature application, the TLE2082AMP is a strong candidate; for a standard commercial-temperature design, the TL072 or TLV9362IDDFR may be more cost-effective."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLE2082AMP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLE2082AMP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}