{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLE2081CP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLE2081CP","canonicalUrl":"https://icboms.com/texas-instruments/TLE2081CP","factsUrl":"https://icboms.com/api/mcp/products/TLE2081CP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments Excalibur™ TLE2081CP, single JFET-input op-amp, 10 MHz gain bandwidth, 45 V/µs slew rate, 4.5 V to 38 V supply, 8-DIP through-hole package, 0°C to 70°C.","salesMarkdown":"## What this JFET op-amp brings to the bench The Texas Instruments TLE2081CP is a single JFET-input operational amplifier from the Excalibur™ series. It delivers a 10 MHz gain-bandwidth product and a 45 V/µs slew rate, which means it can handle fast signal edges and moderate-frequency analog processing — think active filters, data acquisition front-ends, and waveform generation up to a few MHz. The JFET input stage keeps input bias current at 20 pA and input offset voltage at 490 µV, so it works well with high-impedance sensors like photodiodes or piezoelectric transducers without loading the source. Supply range spans 4.5 V to 38 V, single or split supply, and quiescent current is 1.7 mA per amplifier. Output can source or sink 48 mA — enough to drive a typical ADC input or a small headphone load, but not a power stage. The 8-DIP through-hole package (0.300\" width) is a breadboard-friendly footprint; pin 1 is clearly marked by the notch and dot, so orientation is straightforward under a rework station. ## Temperature grade and where it fits Rated for 0°C to 70°C commercial operation, this part belongs in indoor, temperature-controlled equipment — lab instruments, benchtop test gear, audio processors, or office-environment control boards. ## Sourcing and lifecycle reality The TLE2081CP is listed as Active with ROHS3 compliance. No last-time-buy or end-of-life notice is on record.","metaTitle":"TLE2081CP JFET Op-Amp, 10 MHz, 45 V/µs, 8-DIP","metaDescription":"Texas Instruments TLE2081CP JFET op-amp, single circuit, 10 MHz gain bandwidth, 45 V/µs slew rate, 8-DIP through-hole package. Active, ROHS3. Sourced to order.","metaKeywords":null},"attributes":{"series":"Excalibur™","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Series":"Excalibur™","Package":"Tube","Slew Rate":"45V/µs","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"1.7mA","Number of Circuits":"1","Current - Input Bias":"20 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"10 MHz","Voltage - Input Offset":"490 µV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"48 mA","Voltage - Supply Span (Max)":"38 V","Voltage - Supply Span (Min)":"4.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.83","priceTiers":[{"qty":1,"price":"$2.83000","currency":"USD"},{"qty":10,"price":"$2.54000","currency":"USD"},{"qty":25,"price":"$2.40160","currency":"USD"},{"qty":100,"price":"$2.08150","currency":"USD"},{"qty":250,"price":"$1.97472","currency":"USD"},{"qty":500,"price":"$1.77192","currency":"USD"},{"qty":1000,"price":"$1.51050","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/7366e71f0051529c53a0de02512a19c3.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TLE2081CP/alternatives.json"},"ai":{"faq":[{"question":"What is the TLE2081CP equivalent or replacement?","answer":"There is no official direct replacement listed. For a surface-mount JFET op-amp with similar bandwidth, consider the TLV9351IDCKR (3.5 MHz, 20 V/µs, rail-to-rail output) or the TLV9362IDDFR (10.6 MHz, 25 V/µs, dual channel) — but verify pin compatibility and supply voltage range for your design."},{"question":"What is the TLE2081CP price and MOQ?","answer":"Pricing and minimum order quantity are confirmed at the time of quote. Submit an RFQ for current pricing and available quantities through our distribution network."},{"question":"TLE2081CP vs TL081: what are the differences?","answer":"Both are single JFET op-amps in 8-DIP, but the TLE2081CP offers a higher slew rate (45 V/µs vs 13 V/µs typical for the TL081) and a wider supply range (up to 38 V vs 36 V). The TL081 is a classic general-purpose part; the TLE2081CP is better suited for faster signal conditioning where slew rate matters."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLE2081CP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLE2081CP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}